Hi,
thanks, but i thought there is some userland-based solution ...
If i remove the "clear stall" command from the kernel, how will this
affect the other USB devices ? Is there a guarantee they will continue to
function as normal ?
Vladimir
On Fri, 7 Mar 2008 18:55:46 +0100
Hans Petter Selasky <[EMAIL PROTECTED]> wrote:
> Hi,
>
> You could search in /sys/dev/usb for xxx_pipe_open() or something like that,
> and remove the clear stall command from that function and the recompile your
> kernel and modules.
>
> --HPS
>
>
> On Friday 07 March 2008, Vladimir Terziev wrote:
> > On Thu, 6 Mar 2008 18:07:44 +0100
> >
> > Hans Petter Selasky <[EMAIL PROTECTED]> wrote:
> > > On Thursday 06 March 2008, Vladimir Terziev wrote:
> > > > Hi,
> > > >
> > > > i have ACS ACR38T Smart card reader/write device
> > > > (idVendor=0x072f,
> > > > idProduct=0x90cc), which is an USB stick. I try to make it to work
> > > > under FreeBSD (trys have been done on 5.4, 5.5 and 6.2).
> > > >
> > > > The device has 3 endpoints -- interrupt-in, configured as
> > > > /dev/ugenX.1
> > > > and bulk-in/bulk-out, configured as /dev/ugenX.2.
> > > >
> > > > Neither the driver from openct-0.6.14 port nor the driver from
> > > > ccid-1.3.5 port work for the device.
> > > >
> > > > The communication with the device gets stuck on BULK-OUT
> > > > operations.
> > > > write(2) calls to /dev/ugenX.2 hang forever despite the timeout set
> > > > with USB_SET_TIMEOUT.
> > > >
> > > > The device has been tested to work under Windoze, so as
> > > > general, it's
> > > > not broken, but just irresponsive.
> > > >
> > > > Could someone give me some clues about the nature of the
> > > > problem ?
> > > >
> > > > Thanks in advance!
> > > >
> > > > Vladimir
> > >
> > > Hi,
> > >
> > > Some USB devices have problems with Clear Stall. FreeBSD usually clears
> > > the stall on the endpoints before starting to use them. Some devices
> > > empty the fifo when receiving this clear stall, and does not requeue the
> > > data. That is why your device most likely does not work.
> > >
> > > --HPS
> >
> > Is there something i could do in order to workaround such a behaviour ?
> >
> > Vladimir
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
