Hi, You need to update your kernel config file.
For example to enable AXE ethernet support you need both: device usb2_ethernet device usb2_ethernet_axe Try: kldload /boot/kernel/usb2*.ko --HPS On Friday 31 October 2008, Thomas Sparrevohn wrote: > On Friday 31 October 2008 14:14:59 Hans Petter Selasky wrote: > > On Friday 31 October 2008, Thomas Sparrevohn wrote: > > > On Sunday 26 October 2008 15:33:20 Hans Petter Selasky wrote: > > > > > > > > > What is the device naming change to? > > > > The device names under /dev are the same like before. > > > > --HPS > > I was thinking about in the Kernel configuration file - I have been using > and it does not seem to attach anything > > # > # GENERIC -- Generic kernel configuration file for FreeBSD/amd64 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-conf >ig.html # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ../../conf/NOTES and NOTES files. > # If you are in doubt as to the purpose or necessity of a line, check first > # in NOTES. > # > # $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.508 2008/10/03 10:31:31 stas Exp > $ > > cpu HAMMER > ident GENERIC > > # To statically compile in device wiring instead of /boot/device.hints > #hints "GENERIC.hints" # Default places to look for > devices. > > makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols > > options SCHED_ULE # ULE scheduler > options PREEMPTION # Enable kernel thread preemption > options INET # InterNETworking > options INET6 # IPv6 communications protocols > options SCTP # Stream Control Transmission Protocol > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big directories > options UFS_GJOURNAL # Enable gjournal-based UFS journaling > options MD_ROOT # MD is a potential root device > options NFSCLIENT # Network Filesystem Client > options NFSSERVER # Network Filesystem Server > options NFSLOCKD # Network Lock Manager > options NFS_ROOT # NFS usable as /, requires NFSCLIENT > options NTFS # NT File System > options MSDOSFS # MSDOS Filesystem > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > options GEOM_PART_GPT # GUID Partition Tables. > options GEOM_LABEL # Provides labelization > options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] > options COMPAT_IA32 # Compatible with i386 binaries > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options COMPAT_FREEBSD5 # Compatible with FreeBSD5 > options COMPAT_FREEBSD6 # Compatible with FreeBSD6 > options COMPAT_FREEBSD7 # Compatible with FreeBSD7 > options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI > options KTRACE # ktrace(1) support > options STACK # stack(9) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time > extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options STOP_NMI # Stop CPUS using NMI instead of IPI > options AUDIT # Security event auditing > options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) > > # Debugging for use in -current > options KDB # Enable kernel debugger support. > options DDB # Support DDB. > options GDB # Support remote GDB. > options INVARIANTS # Enable calls of extra sanity checking > options INVARIANT_SUPPORT # Extra sanity checks of internal > structures, > required by INVARIANTS options WITNESS # Enable checks > to detect > deadlocks and cycles > options WITNESS_SKIPSPIN # Don't run witness on spinlocks for > speed > > # Make an SMP-capable kernel by default > options SMP # Symmetric MultiProcessor Kernel > > # CPU frequency control > device cpufreq > > # Bus support. > device acpi > device pci > > # Floppy drives > device fdc > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device ataraid # ATA RAID drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID # Static device numbering > > # SCSI Controllers > device ahc # AHA2940 and onboard AIC7xxx devices > options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > device ahd # AHA39320/29320 and onboard AIC79xx > devices > options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > device amd # AMD 53C974 (Tekram DC-390(T)) > device hptiop # Highpoint RocketRaid 3xxx series > device isp # Qlogic family > #device ispfw # Firmware for QLogic HBAs- normally a module > device mpt # LSI-Logic MPT-Fusion > #device ncr # NCR/Symbios Logic > device sym # NCR/Symbios Logic (newer chipsets + > those of `ncr') > device trm # Tekram DC395U/UW/F DC315U adapters > > device adv # Advansys SCSI adapters > device adw # Advansys wide SCSI adapters > device aic # Adaptec 15[012]x SCSI adapters, > AIC-6[23]60. > device bt # Buslogic/Mylex MultiMaster SCSI > adapters > > # SCSI peripherals > device scbus # SCSI bus (required for SCSI) > device ch # SCSI media changers > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI > access) > device ses # SCSI Environmental Services (and > SAF-TE) > > # RAID controllers interfaced to the SCSI subsystem > device amr # AMI MegaRAID > device arcmsr # Areca SATA II RAID > device ciss # Compaq Smart RAID 5* > device dpt # DPT Smartcache III, IV - See NOTES > for options > device hptmv # Highpoint RocketRAID 182x > device hptrr # Highpoint RocketRAID 17xx, 22xx, > 23xx, 25xx > device iir # Intel Integrated RAID > device ips # IBM (Adaptec) ServeRAID > device mly # Mylex AcceleRAID/eXtremeRAID > device twa # 3ware 9000 series PATA/SATA RAID > > # RAID controllers > device aac # Adaptec FSA RAID > device aacp # SCSI passthrough for aac (requires > CAM) > device ida # Compaq Smart RAID > device mfi # LSI MegaRAID SAS > device mlx # Mylex DAC960 family > #XXX pointer/int warnings > #device pst # Promise Supertrak SX6000 > device twe # 3ware ATA RAID > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > > device kbdmux # keyboard multiplexer > > device vga # VGA video card driver > > device splash # Splash screen and screen saver support > > # syscons is the default console driver, resembling an SCO console > device sc > > device agp # support several AGP chipsets > > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > device cbb # cardbus (yenta) bridge > device pccard # PC Card (16-bit) bus > device cardbus # CardBus (32-bit) bus > > # Serial (COM) ports > device uart # Generic UART driver > > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > # If you've got a "dumb" serial or parallel PCI card that is > # supported by the puc(4) glue driver, uncomment the following > # line to enable it (connects to sio, uart and/or ppc drivers): > #device puc > > # PCI Ethernet NICs. > device de # DEC/Intel DC21x4x (``Tulip'') > device em # Intel PRO/1000 Gigabit Ethernet Family > device igb # Intel PRO/1000 PCIE Server Gigabit > Family > device ixgb # Intel PRO/10GbE Ethernet Card > device le # AMD Am7900 LANCE and Am79C9xx PCnet > device ti # Alteon Networks Tigon I/II gigabit > Ethernet > device txp # 3Com 3cR990 (``Typhoon'') > device vx # 3Com 3c590, 3c595 (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these > NICs! device miibus # MII bus support > device ae # Attansic/Atheros L2 FastEthernet > device age # Attansic/Atheros L1 Gigabit Ethernet > device bce # Broadcom BCM5706/BCM5708 Gigabit > Ethernet > device bfe # Broadcom BCM440x 10/100 Ethernet > device bge # Broadcom BCM570xx Gigabit Ethernet > device dc # DEC/Intel 21143 and various workalikes > device et # Agere ET1310 10/100/Gigabit Ethernet > device fxp # Intel EtherExpress PRO/100B (82557, > 82558) > device jme # JMicron JMC250 Gigabit/JMC260 Fast > Ethernet > device lge # Level 1 LXT1001 gigabit Ethernet > device msk # Marvell/SysKonnect Yukon II Gigabit > Ethernet > device nfe # nVidia nForce MCP on-board Ethernet > device nge # NatSemi DP83820 gigabit Ethernet > #device nve # nVidia nForce MCP on-board Ethernet > Networking > device pcn # AMD Am79C97x PCI 10/100 (precedence > over 'le') > device re # RealTek 8139C+/8169/8169S/8110S > device rl # RealTek 8129/8139 > device sf # Adaptec AIC-6915 (``Starfire'') > device sis # Silicon Integrated Systems SiS > 900/SiS 7016 > device sk # SysKonnect SK-984x & SK-982x gigabit > Ethernet > device ste # Sundance ST201 (D-Link DFE-550TX) > device tl # Texas Instruments ThunderLAN > device tx # SMC EtherPower II (83c170 ``EPIC'') > device vge # VIA VT612x gigabit Ethernet > device vr # VIA Rhine, Rhine II > device wb # Winbond W89C840F > device xl # 3Com 3c90x (``Boomerang'', > ``Cyclone'') > > # ISA Ethernet NICs. pccard NICs included. > device cs # Crystal Semiconductor CS89x0 NIC > # 'device ed' requires 'device miibus' > device ed # NE[12]000, SMC Ultra, 3c503, DS8390 > cards > device ex # Intel EtherExpress Pro/10 and Pro/10+ > device ep # Etherlink III based cards > device fe # Fujitsu MB8696x based cards > device sn # SMC's 9000 series of Ethernet chips > device xe # Xircom pccard Ethernet > > # Wireless NIC cards > device wlan # 802.11 support > options IEEE80211_DEBUG # enable debug msgs > options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder > q's > device wlan_wep # 802.11 WEP support > device wlan_ccmp # 802.11 CCMP support > device wlan_tkip # 802.11 TKIP support > device wlan_amrr # AMRR transmit rate control algorithm > device an # Aironet 4500/4800 802.11 wireless > NICs. > device ath # Atheros pci/cardbus NIC's > device ath_hal # Atheros HAL (Hardware Access Layer) > device ath_rate_sample # SampleRate tx rate control for ath > device ral # Ralink Technology RT2500 wireless > NICs. > device wi # WaveLAN/Intersil/Symbol 802.11 > wireless NICs. > > # Pseudo devices. > device loop # Network loopback > device random # Entropy device > device ether # Ethernet support > device tun # Packet tunnel. > device pty # BSD-style compatibility pseudo ttys > device md # Memory "disks" > device gif # IPv6 and IPv4 tunneling > device faith # IPv6-to-IPv4 relaying (translation) > device firmware # firmware assist module > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # Note that 'bpf' is required for DHCP. > device bpf # Berkeley packet filter > > # > # USB2 > # > device usb2_core > device usb2_controller > device usb2_storage > device usb2_ethernet > device usb2_wlan > device usb2_serial > device usb2_input > device usb2_quirk > device usb2_template > device usb2_image > > > # USB support > #device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > #device ehci # EHCI PCI->USB interface (USB 2.0) > #device usb # USB Bus (required) > ##device udbp # USB Double Bulk Pipe devices > #device ugen # Generic > #device uhid # "Human Interface Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus > and da > #device ums # Mouse > #device ural # Ralink Technology RT2500USB wireless > NICs > #device rum # Ralink Technology RT2501USB wireless > NICs > #device urio # Diamond Rio 500 MP3 player > #device uscanner # Scanners > # USB Serial devices > #device ucom # Generic com ttys > #device uark # Technologies ARK3116 based serial > adapters > #device ubsa # Belkin F5U103 and compatible serial > adapters > #device uftdi # For FTDI usb serial adapters > #device uipaq # Some WinCE based devices > #device uplcom # Prolific PL-2303 serial adapters > #device uslcom # SI Labs CP2101/CP2102 serial adapters > #device uvisor # Visor and Palm devices > #device uvscom # USB serial support for DDI pocket's > PHS > # USB Ethernet, requires miibus > #device aue # ADMtek USB Ethernet > #device axe # ASIX Electronics USB Ethernet > #device cdce # Generic USB over Ethernet > #device cue # CATC USB Ethernet > #device kue # Kawasaki LSI USB Ethernet > #device rue # RealTek RTL8150 USB Ethernet > #device udav # Davicom DM9601E USB > > # FireWire support > device firewire # FireWire bus code > device sbp # SCSI over FireWire (Requires scbus > and da) > device fwe # Ethernet over FireWire (non-standard!) > device fwip # IP over FireWire (RFC 2734,3146) > device dcons # Dumb console driver > device dcons_crom # Configuration ROM for dcons _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
