In message: <200902071303.53394.hsela...@c2i.net>
Hans Petter Selasky <hsela...@c2i.net> writes:
: On Saturday 07 February 2009, Mike Tancsa wrote:
: > At 04:36 AM 2/7/2009, Hans Petter Selasky wrote:
: > >Hi Mike,
: > >
: > >The ugen devices are invisible and dynamically created.
: > >
: > >Try open /dev/ugen0.2.0.0 (control endpoint)
: > >
: > >Also you need to re-link your application with
: > > "dev/usb2/include/usb2_ioctl.h"
: > >
: > >Format is /dev/ugen<bus>.<addr>.<ifaceindex>.<endpointno>
: > >
: > >I recommend using libusb20 to access your USB device.
: > >
: > >See "man libusb20".
: >
: > Hi,
: > Thanks for the response. These are all out of the ports
: > (openct,opensc). Are there any pointers somewhere on how to best
: > teach old apps about the new USB2 world on FreeBSD ?
: >
:
: Hi Mike,
:
: Most commonly the following advice helps:
:
: Add to /etc/libmap.conf:
: libusb-0.1.so libusb20.so
: libusb-0.1.so.8 libusb20.so.1
:
: Also see:
: http://wiki.freebsd.org/USB
What about for apps that don't use libusb?
Warner
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
