At 05:36 PM 2/26/2009, Kim Culhan wrote:
u3g0: <Data Interface> on usbus2
u3g0: Found 4 ports.
umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev
1.10/0.00, addr 2> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:1:0:-1: Attached to scbus1
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Novatel MMC Storage 2.31> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
If you do a
camcontrol eject pass0
does /dev/cuaU* now show up ?
I have a different Novatel unit where I have to do that to get it to work.
umass0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0,
rev 1.10/0.00, addr 2> on uhub0
vr0: vr_stop: Rx shutdown error
vr0: Using force reset command.
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
ucom0: <Novatel Wireless Novatel Wireless HSUPA Modem, class 0/0, rev
1.10/0.00, addr 2> on uhub0
ucom0: configured 2 serial ports (U0.%d)
---Mike
-kim
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
