After my last update to March 1 sources, uhci started going into interrupt storm mode:
$ vmstat -i interrupt total rate irq1: atkbd0 8676 1 irq9: acpi0 12412 2 irq12: psm0 5979 1 irq14: ata0 601562 136 irq15: ata1 69 0 irq16: uhci0 745625990 169191 irq19: uhci3 5906 1 irq23: uhci2 ehci1 1 0 cpu0: timer 8813127 1999 irq256: hdac0 116677 26 irq258: re0 2438 0 cpu1: timer 8804089 1997 irq259: vgapci0 20525 4 Total 764017451 173364 Setting hw.usb2.uhci.debug=1 I see many repeated messages like: Mar 5 10:06:39 foo kernel: uhci_interrupt:1453: uhci_interrupt: host controller halted Mar 5 10:06:39 foo kernel: uhci_dumpregs:691: usbus0 regs: cmd=0080, sts=0020, intr=000f, frnum=0072, flbase=010be1c8, sof=0040, portsc1=0080, portsc2=0080 Mar 5 10:06:39 foo kernel: uhci_dump_qh:764: QH(0xc6251e00) at 0x01a51e02: h_next=0x01a79e82 e_next=0x00000001 Mar 5 10:06:39 foo kernel: uhci_dump_qh:764: QH(0xc6279e80) at 0x01a79e82: h_next=0x01a76702 e_next=0x00000001 Mar 5 10:06:39 foo kernel: uhci_dump_qh:764: QH(0xc6276700) at 0x01a76702: h_next=0x01a8b002 e_next=0x00000001 Mar 5 10:06:39 foo kernel: uhci_dump_qh:764: QH(0xc628b000) at 0x01a8b002: h_next=0x00000001 e_next=0x01a77080 There are local changes in this src/ tree, but none of them seems related to usb2 going crazy. I am running an i386 kernel build from the `KOBE' config file shown in the patch uploaded at: http://people.freebsd.org/~keramida/diff/gker.head.r189392.diff usbconfig shows only my USB mouse attached at the time: # usbconfig ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen6.1: <EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.2: <product 0x0003 Creative Labs> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON Is this a known problem with kernels from March 1, or a new one? _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
