At 05:40 PM 3/18/2009, Andrew Thompson wrote:
On Wed, Mar 18, 2009 at 04:15:46PM -0400, Mike Tancsa wrote:
> Hi,
> I was trying to see if OpenCT and OpenSC work under the new USB
> regime, but openCT doesnt compile now. Are there any tricks to get it to
> compile and or work ?
>
Can you try this patch.
http://people.freebsd.org/~thompsa/openct.diff
Thanks! It does build now. However, not all of the bits seem to be
working just yet
1[i7]# opensc-tool -l
[opensc-tool] reader-pcsc.c:996:pcsc_detect_readers: returning with:
No readers found
No smart card readers found.
0[i7]# ps -auxww | grep if
root 64638 0.0 0.1 3328 1640 ?? Ss 7:57PM 0:00.00
/usr/local/sbin/ifdhandler -H etoken64 usb (null)/usb//dev/usb//dev/ugen1.2
root 64653 0.0 0.1 3440 1616 2 R+ 7:59PM 0:00.00 grep if
0[i7]#
0[i7]# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen6.1: <UHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen6.2: <product 0x1400 Holtek Semiconductor, Inc.> at usbus6, cfg=0
md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen1.2: <Token 4.28.1.1 2.7.195 Aladdin Knowledge Systems Ltd.> at
usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.2: <Uninterruptible Power Supply American Power Conversion> at
usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
0[i7]#
---Mike
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
