2010/1/7 Andrew <[email protected]>: > 2010/1/6 Hans Petter Selasky <[email protected]>: >> On Wednesday 06 January 2010 21:26:03 Andrew wrote: >>> >Number: 142387 >>> >Category: usb >>> >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload >>> >Confidential: no >>> >Severity: non-critical >>> >Priority: low >>> >Responsible: freebsd-usb >>> >State: open >>> >Quarter: >>> >Keywords: >>> >Date-Required: >>> >Class: sw-bug >>> >Submitter-Id: current-users >>> >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 >>> >Closed-Date: >>> >Last-Modified: >>> >Originator: Andrew >>> >Release: 8-STABLE >>> >Organization: >>> >Environment: >>> >>> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT >>> 2010 r...@xxxxxx:/usr/obj/usr/src/sys/GENERIC amd64 >>> >>> >Description: >>> >>> After running uathload the device changes from: >>> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST >>> spd=HIGH (480Mbps) pwr=ON >>> >>> bLength = 0x0012 >>> bDescriptorType = 0x0001 >>> bcdUSB = 0x0200 >>> bDeviceClass = 0x00ff >>> bDeviceSubClass = 0x0000 >>> bDeviceProtocol = 0x0000 >>> bMaxPacketSize0 = 0x0040 >>> idVendor = 0x1385 >>> idProduct = 0x5f01 >>> bcdDevice = 0x0001 >>> iManufacturer = 0x0001 <Atheros Communications Inc> >>> iProduct = 0x0002 <WPN111> >>> iSerialNumber = 0x0003 <1.0> >>> bNumConfigurations = 0x0001 >>> to: >>> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST >>> spd=HIGH (480Mbps) pwr=ON >>> >>> bLength = 0x0012 >>> bDescriptorType = 0x0001 >>> bcdUSB = 0x0200 >>> bDeviceClass = 0x00ff >>> bDeviceSubClass = 0x0000 >>> bDeviceProtocol = 0x0000 >>> bMaxPacketSize0 = 0x0040 >>> idVendor = 0x1385 >>> idProduct = 0x5f02 >>> bcdDevice = 0x0001 >>> iManufacturer = 0x0001 <Atheros Communications Inc> >>> iProduct = 0x0002 <WPN111> >>> iSerialNumber = 0x0003 <1.0> >>> bNumConfigurations = 0x0001 >>> >>> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >>> >>> >How-To-Repeat: >>> >>> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >>> >>> >Fix: >>> >>> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >>> attached. >>> >>> uath now attachs: >>> >>> dmesg: >>> ugen3.2: <Atheros Communications Inc> at usbus3 (disconnected) >>> ugen3.2: <Atheros Communications Inc> at usbus3 >>> uath0: <Atheros Communications Inc WPN111, rev 2.00/0.01, addr 2> on usbus3 >>> >>> >>> ifconfig uath0 >>> uath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 >>> ether 00:14:6c:ea:81:a4 >>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >>> status: no carrier >>> >>> >>> Patch attached with submission follows: >>> >>> --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 >>> +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 >>> @@ -2005,8 +2005,8 @@ >>> product NETGEAR2 MA101B 0x4102 MA101 Rev B >>> product NETGEAR3 WG111T 0x4250 WG111T >>> product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) >>> -product NETGEAR3 WPN111 0x5f00 WPN111 >>> product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) >>> +product NETGEAR3 WPN111 0x5f02 WPN111 >>> >>> /* Nikon products */ >>> product NIKON E990 0x0102 Digital Camera E990 >>> >>> >Release-Note: >>> >Audit-Trail: >>> >Unformatted: >> >> Hi, >> >> Are you certain that product "0x5f00" is incorrect and that we shouldn't add >> the new product, 0x5f02 instead? > > I can't be certain no, it was an assumption on my part that the WPN111 > id was incorrect as the WPN111_NF was correct for the device. Adding a > second id for WPN111 will be enough for my hardware to work.
I have just seen this thread on -net: http://lists.freebsd.org/pipermail/freebsd-net/2010-January/024182.html Seems to be another Netgear uath(4) device that increments rather than decrements it's productId, but that's by no means conclusive. Regards, Andrew _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
