On 01/12/10 09:34, Hans Petter Selasky wrote:
On Tuesday 12 January 2010 18:28:30 Mark Atkinson wrote:
On 01/10/10 05:37, Hans Petter Selasky wrote:
Feedback and bug reports are welcome.
I tried a old webcam that was one of the impetus behind the spca50x
project for linux. Really quite old now, so I'm not surprised it
doesn't work, but I figured I'd try it.
http://www.qbik.ch/usb/devices/showdev.php?id=2011
ugen6.3:<vendor 0x0733> at usbus6
[r...@moby ulinux]$ ./webcamd -d ugen6.3 -i 0 -v 0
KrefGet: 0x28421004 = 1
Added device 0x283df304
KrefGet: 0x283df308 = 1
KrefGet: 0x283df308 = 2
KrefPut: 0x283df308 = 2
KrefGet: 0x283df308 = 2
KrefPut: 0x283df308 = 2
KrefGet: 0x283df308 = 2
KrefPut: 0x283df308 = 2
pcwview displays all green for a few seconds and then dies with:
[r...@moby ulinux]$ pwcview/pwcview
Webcam set to: 320x240 (sif) at 5 fps
libv4l2: error dequeuing buf: Device not configured
Error reading from webcam: Device not configured
Hi,
Which revision of the software are you using?
Sorry I'm using -current (up to date from yesterday), and
[r...@moby ulinux]$ svn update
At revision 1372.
I've committed some stability fixes today and yesterday. Make sure you are
using the latest stuff. When using gspca you need to wait until the Added
device is printed before starting the pwcview.
Hopefully it is, I can't see any immediate way for it to tell me it's
using the correct driver. I can see from kdump the ioctl failures that
return the error. I'd have to test on v4l on a native linux
installation to be sure it's not a problem there anyway.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
