>Number: 142876 >Category: usb >Synopsis: sysinstall abort:: usb stick as source media & usb stick as >install target >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Jan 16 10:00:09 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Joe Barbish >Release: 8.0 release >Organization: none >Environment: >Description: Using 2 USB sticks. da0 2GB as the bootable install media and da1 4GB target device that freebsd is to be installed on.
I have put the disc-1 iso onto a usb stick. I can boot this usb stick (da0) and use the default sysinstall program to install from to any motherboard cabled hard drive. This works as exspected. But when i try to target another usb stick (da1) to install to, sysinstall works normally up to the message "this is your last chance before writing to the media". Then i get a abort message "Unable to find device node for /dev/da1s1b in /dev!". I then select vty1 and see this message "geom: da1: media size does not match label." Followed by these repeating messages "debug scanning disk da1 root file system" and "debug scanning disk da1 swap file system" As sysinstall presents da1 for fdisk i selected to use all the 4gb for the slice and took the auto partition allocation option in disklabel. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
