On Wednesday 03 February 2010 10:47:56 Peter Jeremy wrote: > [Based on a thread in -stable] > > I am trying to upgrade a Dell GX620 from FreeBSD 7.1 to a recent > FreeBSD 8-stable and have run into a regression in the ukbd probe > order. This box has no PS/2 ports and therefore I use a USB > keyboard (and have removed atkbdc, atkbd and kbdmux from my kernel). > All relevant USB devices are compiled in. > > In 7.x, ukbd probes before the kernel mounts root. In 8.x, ukbd > probes after the kernel mounts root (it actually probes asynchronously > after the "Enter full pathname of shell..." prompt). (This bit me > badly because I managed to screw up my root disk name and got > prompted with 'mountroot>' but had no keyboard). > > The GX620 is a P4 system with an ICH7 chipse. The keyboard is a Dell > SK-8115 connected directly to a motherboard port (I've tried several > different USB ports without improvement). I've also tried a Dell > SK-8135 (which is the "multimedia" variant and has a builtin hub) > which behaves the same. > > I've uploaded full details as follows: > FreeBSD 7.x verbose dmesg: http://pastebin.ca/1776339 > FreeBSD 8.x verbose dmesg: http://pastebin.ca/1776359 > "pciconf -lv" (same in 7 & 8): http://pastebin.ca/1776363 > > The output from 'usbdevs -v' on FreeBSD 7 is: > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 >
There has been some patches to ukbd.c recently. Try to apply those first: fetch -o /usr/src/sys/dev/usb/input/ukbd.c "http://p4db.freebsd.org/fileDownLoad.cgi?FSPC=//depot/projects/usb/src/sys/dev/usb/input/ukbd.c&REV=43"; --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
