Hi All, I hope it's a right place to ask, if no, please advice right mailing list.
My server is based on intel S5000PAL motherboard and have dedicated "Intel remote management module 2". If I try to boot from remotely mounted installation drive/iso (FreeBSD 8.0-RELEASE) it goes fine until I choose installation media - in messages I see a read error. If I try to mount remote drive on working FreeBSD (also 8.0-RELEASE) - I see that virtual device recognized fine, but gets error when trying to mount: Remotely connecting iso: 12:53:33 kernel: umass3: <Intel(R) Multidevice, class 0/0, rev 2.00/0.01, addr 2> on usbus4 12:53:33 kernel: umass3: SCSI over Bulk-Only; quirks = 0x0000 12:53:34 kernel: umass3:3:3:-1: Attached to scbus3 12:53:35 kernel: (probe0:umass-sim3:3:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 12:53:35 kernel: (probe0:umass-sim3:3:0:0): CAM Status: SCSI Status Error 12:53:35 kernel: (probe0:umass-sim3:3:0:0): SCSI Status: Check Condition 12:53:35 kernel: (probe0:umass-sim3:3:0:0): UNIT ATTENTION asc:29,0 12:53:35 kernel: (probe0:umass-sim3:3:0:0): Power on, reset, or bus device reset occurred 12:53:35 kernel: (probe0:umass-sim3:3:0:0): Retrying Command (per Sense Data) 12:53:35 kernel: cd3 at umass-sim3 bus 3 target 0 lun 0 12:53:35 kernel: cd3: <Intel(R) RMM2 VDrive 4 0.01> Removable CD- ROM SCSI-3 device 12:53:35 kernel: cd3: 40.000MB/s transfers 12:53:35 kernel: cd3: cd present [1058112 x 2048 byte records] And now I trying to mount it: 12:54:20 kernel: g_vfs_done():cd3[READ(offset=32768, length=2048)]error = 5 This error repeats on any virtual iso/drives. Has anyone else seen similar problems? Thanks in advance for any help. -- With best regards, Pavel Sukhoy. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
