As it is visible from dmesg the device doesn't get attached at all. In addition, the computer freezes briefly as I turn the device on.
Perhaps it is worth mentioning that the device works just fine on Linux. dmesg: ugen6.2: <Sunplus Technology Inc.> at usbus6 umass0: <Bulk Only Interface> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:0:0:-1: Attached to scbus0 (da0:umass-sim0:0:0:0): AutoSense failed (da0:umass-sim0:0:0:0): got CAM status 0x10 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): AutoSense failed (da0:umass-sim0:0:0:0): removing device entry usbconfig -u 6 -a 2 dump_curr_config_desc: ugen6.2: <USB to Serial-ATA bridge Sunplus Technology Inc.> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0020 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0004 <Bulk Only Configuration> bmAttributes = 0x00c0 bMaxPower = 0x0001 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x0008 bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0050 iInterface = 0x0005 <Bulk Only Interface> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 usbconfig -u 6 -a 2 dump_device_desc ugen6.2: <USB to Serial-ATA bridge Sunplus Technology Inc.> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x04fc idProduct = 0x0c15 bcdDevice = 0xc683 iManufacturer = 0x0002 <Sunplus Technology Inc.> iProduct = 0x0003 <USB to Serial-ATA bridge> iSerialNumber = 0x0001 <Maxtor 6V2V599R1GG > bNumConfigurations = 0x0001 _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"