On Friday 23 July 2010 09:03:20 Hans Petter Selasky wrote:
> On Thursday 22 July 2010 22:11:16 Nicolas wrote:
> > Hi,
> > 
> > I'm using FreeBSD-9 current and i have a strange problem with my usb
> > hard drive.
> > My logitech usb mouse is plugged in and when i plug my hdd, i have this
> > message:
> > 
> > ugen3.2: <Logitech> at usbus3 (disconnected)
> > ums0: at uhub3, port 1, addr 2 (disconnected)
> > ugen7.4: <Maxtor> at usbus7
> > umass0: <Maxtor Maxtor OneTouch III, class 0/0, rev 2.00/0.01, addr 4>
> > on usbus7
> > umass0:  SCSI over Bulk-Only; quirks = 0x0000
> > umass0:2:0:-1: Attached to scbus2
> > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> > da0: <Maxtor OneTouch III 0364> Fixed Direct Access SCSI-4 device
> > da0: 40.000MB/s transfers
> > da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
> > GEOM: da0s1: geometry does not match label (64h,32s != 255h,63s).
> > GEOM: ufsid/4c0e3769aa2965dbs1: geometry does not match label (64h,32s
> > != 255h,63s).
> > ugen3.2: <Logitech> at usbus3
> > ums0: <Logitech USB RECEIVER, class 0/0, rev 1.10/25.10, addr 2> on
> > usbus3 ums0: 16 buttons and [XYZT] coordinates ID=0
> > pid 1843 (Xorg), uid 0: exited on signal 6 (core dumped)
> > pid 1888 (polkit-gnome-authen), uid 92: exited on signal 4 (core dumped)
> > 
> > My mouse disconnects itself then reconnect and Xorg crash.
> > Someone have this problem ?
> 
> I've also seen panics when inserting certain USB dongles. Probably there
                 ^^^^ I mean segfaults in hald

> are some bugs in the HAL layer. Maybe there is some missing information
> about the USB device that makes it crash.
> 

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to