On 13 December 2010 07:49, Emanuel Haupt <eha...@freebsd.org> wrote:
> Is there any way I can make sure that the following device:
>
> ugen1.3: <product 0x6001 vendor 0x0403> at usbus1, cfg=0 md=HOST spd=FULL 
> (12Mbps) pwr=ON
>
>  bLength = 0x0012
>  bDescriptorType = 0x0001
>  bcdUSB = 0x0200
>  bDeviceClass = 0x0000
>  bDeviceSubClass = 0x0000
>  bDeviceProtocol = 0x0000
>  bMaxPacketSize0 = 0x0008
>  idVendor = 0x0403
>  idProduct = 0x6001
>  bcdDevice = 0x0400
>  iManufacturer = 0x0000  <no string>
>  iProduct = 0x0000  <no string>
>  iSerialNumber = 0x0003  <Reader 195>
>  bNumConfigurations = 0x0001
>
> Is always registered as:
>
> /dev/usb/1.3.0

You would be better making a symlink using devd rules, something like

notify 100 {
        match "system"          "USB";
        match "subsystem"       "DEVICE";
        match "type"            "ATTACH";
        match "vendor"          "0x0403";
        match "product"         "0x6001";
        action "ln -s /dev/$cdev /dev/mydevice";
};


Andrew
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to