On Thursday 13 January 2011 03:44:13 Yaocl wrote: > Hi > > I have a old hp t5700 thin client which has a VIA 83C572 USB controller. > My planex UE-200TX-G (supported by if_axe driver ax88772 chip) can not > work when I boot to FreeBSD 8.1 or 8.2 or pfSense. > > Got following error message > > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, > ignored) usbd_req_re_enumerate: getting device descriptor at addr 2 > failed, USB_ERR_TIMEOUT > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, > ignored) usbd_req_re_enumerate: getting device descriptor at addr 2 > failed, USB_ERR_TIMEOUT > usb_alloc_device: Failure selecting configuration index > 0:USB_ERR_TIMEOUT, port 2, addr 2 (ignored) > ugen1.2: <vendor 0x0b95> at usbus1 > > only be detected as a ugen device. > > I think this maybe because it not compatibly with my VIA usb > controller.I can use the UE-200TX-G nic on other machine with FB8.1 & > 8.2。And it can work in virtualbox ,virtualbox emulate a ohci > controller for usb 1.1。 > > Any suggestion for this problem? are these error message related to > uhci driver or if_axe driver ? >
The errors you are seeing are related to uhci/ohci controller. Make sure your device is supplied enough current. Also try using an external USB HUB. --HPS _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"