>Number:         155229
>Category:       usb
>Synopsis:       patch for BUFFALO WLI-UC-G301N (USB WLAN)
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Thu Mar 03 15:00:18 UTC 2011
>Originator:     Yoshiaki UCHIKAWA
>Release:        FreeBSD 9.0-current amd64
FreeBSD xxx.xxx.xxx 9.0-CURRENT FreeBSD 9.0-CURRENT #0: Wed Mar  2 22:40:33 JST 
2011     yoshi...@xxx.xxx.xxx:/usr/src/sys/amd64/compile/AMD64TEST
This is patch for BUFFALO WLI-UC-G301N (USB WLAN Unit)
It works fine. (if_run)

run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address 
run0: firmware RT3071 loaded
wlan0: Ethernet address: 00:24:a5:xx:xx:xx



Patch attached with submission follows:

--- /usr/src/sys/dev/usb/usbdevs.orig   2011-02-24 18:13:47.000000000 +0900
+++ /usr/src/sys/dev/usb/usbdevs        2011-03-02 23:28:55.191784171 +0900
@@ -2157,6 +2157,7 @@
 product MELCO RT2870_1         0x0148  RT2870
 product MELCO RT2870_2         0x0150  RT2870
 product MELCO WLIUCGN          0x015d  WLI-UC-GN
+product MELCO WLIUCG301N       0x016f  WLI-UC-G301N
 /* Merlin products */
 product MERLIN V620             0x1110  Merlin V620
--- /usr/src/sys/dev/usb/wlan/if_run.c.orig     2011-02-14 17:14:06.000000000 
+++ /usr/src/sys/dev/usb/wlan/if_run.c  2011-03-02 23:29:33.766794197 +0900
@@ -210,6 +210,7 @@
     RUN_DEV(MELCO,             RT2870_2),
     RUN_DEV(MELCO,             WLIUCAG300N),
     RUN_DEV(MELCO,             WLIUCG300N),
+    RUN_DEV(MELCO,             WLIUCG301N),
     RUN_DEV(MELCO,             WLIUCGN),
     RUN_DEV(MOTOROLA4,         RT2770),
     RUN_DEV(MOTOROLA4,         RT3070),

freebsd-usb@freebsd.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to