On Sunday 26 June 2011 05:46:35 Brandon Gooch wrote:
> On Wed, Jun 22, 2011 at 11:17 AM, Maksim Yevmenkin
> 
> <maksim.yevmen...@gmail.com> wrote:
> > On Tuesday, June 21, 2011, Brandon Gooch <jamesbrandongo...@gmail.com> 
wrote:
> >> I have one of these in my notebook:
> >> 
> >> uhub4: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 5> on usbus0
> >> 
> >> This is a bluetooth device in HID mode, but I'd like to switch it to
> >> HCI mode. I found the following in rc.conf(5):
> >> 
> >>      ubthidhci_enable
> >>                  (bool) If set to ``YES'', change the USB Bluetooth
> >> controller from HID mode to HCI mode.  You also need to specify the
> >> location of USB Bluetooth controller with the
> >>                  ubthidhci_busnum and ubthidhci_addr variables.
> >> 
> >>      ubthidhci_busnum
> >>                  Bus number where the USB Bluetooth controller is
> >> located. Check the output of usbconfig(8) on your system to find this
> >> information.
> >> 
> >>      ubthidhci_addr
> >>                  Bus address of the USB Bluetooth controller.  Check the
> >> out- put of usbconfig(8) on your system to find this information.
> >> 
> >> So I added the appropriate directives to /etc/rc.conf, to no avail:
> >> 
> >> ubthidhci_enable="YES"
> >> ubthidhci_busnum="0"
> >> ubthidhci_addr="5"
> >> 
> >> This basically calls usbconfig(8) at system start-up in the following
> >> way:
> >> 
> >> /usr/sbin/usbconfig -u 0 -a 5 do_request 0x40 0 0 0 0 > /dev/null 2>&1
> >> 
> >> Running this command manually, I see this output:
> >> 
> >> REQUEST = <ERROR>
> >> 
> >> ...which I've read as potentially being OK, as the operation still may
> >> have successfully completed -- it hasn't :(
> >> 
> >> So, has anyone had any luck using this rc.conf(5) directive, or does
> >> anyone on this list have a modified usbconfig(8) command that may help
> >> me coax HCI from this device?
> > 
> > Switching device between hid and hci modes is s something that is
> > device / manufacturer specific. It could be that this particular
> > device need different request or something like that. I would suggest
> > to look at linux tool called hid2hci. It has support for different
> > devices from different manufacturers.
> > 
> > Thanks,
> > Max
> 
> That was an excellent suggestion, so I went and checked it out. In
> fact, I verified that it indeed does the trick in a couple of recent
> Linux distros.
> 
> So can someone help me decipher the byte sequence I need to provide to
> usbconfig(8)?
> 
> The hid2hci utility has this function defined for dealing with the
> device in question:
> 
> http://git.kernel.org/?p=bluetooth/bluez.git;a=blob;f=tools/hid2hci.c;h=45a
> 3a3db8b29411ee193e480f5ce8a82a40103d1;hb=7822123d08b176ef8b3e8aaecbc3c8ff25
> a33483#l122
> 
> static int usb_switch_dell(struct usb_dev_handle *dev, enum mode mode)
> ...
>         char report[] = { 0x7f, 0x00, 0x00, 0x00 };
> ...
>         report[1] = 0x13;
> ....
>         err = usb_control_msg(dev,
>             USB_ENDPOINT_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
>             USB_REQ_SET_CONFIGURATION, 0x7f | (0x03 << 8), 0,
>             report, sizeof(report), 5000);
> ...
> 
> And according to:
> 
> http://lxr.linux.no/#linux+v2.6.39/include/linux/usb.h#L1400
> 
> usb_control_msg() is prototyped:
> 
> extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
>          __u8 request, __u8 requesttype, __u16 value, __u16 index,
>          void *data, __u16 size, int timeout);
> 
> ...and I'd like to know what this means in terms of the following
> (from src/usr.sbin/usbconfig/usbconfig.c):
> 
> libusb20_dev_request_sync(pdev, &opt->setup,
>     opt->buffer, &actlen, 5000 /* 5 seconds */ , 0))
> 
> which is prototyped as:
> 
> libusb20_dev_request_sync(struct libusb20_device *pdev,
>          struct LIBUSB20_CONTROL_SETUP_DECODED *setup, void *data,
>          uint16_t *pactlen, uint32_t timeout, uint8_t flags);
> 
> I'm looking for something like the following:
> 
> # usbconfig -u 0 -a 5 do_request 0x37f 0x13 0 0 0
> 
> However, this isn't correct I know, but I could use some help sorting
> it out -- any takers?
> 

Hi,

Try this:

usbconfig -d X.Y do_request 0x21 0x09 0x037f 0x0000 0x04 0x7f 0x13 0x00 0x00

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to