The following reply was made to PR usb/159274; it has been noted by GNATS.

From: "Jason Seidel" <jsei...@unixsystem.org>
To: Peter Jeremy <peterjer...@acm.org>
Cc:  
Subject: Re: usb/159274: USB 3.0 Etron EJ168A does not work.
Date: Sat, 30 Jul 2011 20:17:01 -0400

 I'm not sure which Id it is there are usb2 and 3 controllers on the board. 
 
 I just ran kldload xhci, here is what is displayed.
 
 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe907fff irq 18 at
 device 0.0 on pci5
 xhci0: [ITHREAD]
 xhci0: Driver does not support 64-byte contexts.xhci0: XHCI halt/start/probe
 failed err=18
 device_attach: xhci0 attach returned 6
 
 # pciconf -lc
 hostb0@pci0:0:0:0:      class=0x060000 card=0x15101849 chip=0x15101022
 rev=0x00 hdr=0x00
 vgapci0@pci0:0:1:0:     class=0x030000 card=0x98021849 chip=0x98021002
 rev=0x00 hdr=0x00
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 10[58] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
     cap 05[a0] = MSI supports 1 message, 64 bit
 ecap 000b[100] = unknown 1
 hdac0@pci0:0:1:1:       class=0x040300 card=0x13141849 chip=0x13141002
 rev=0x00 hdr=0x00
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 10[58] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
     cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
 ecap 000b[100] = unknown 1
 pcib1@pci0:0:4:0:       class=0x060400 card=0x12341022 chip=0x15121022
 rev=0x00 hdr=0x01
     cap 01[50] = powerspec 3  supports D0 D3  current D0
     cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x4)
     cap 05[a0] = MSI supports 1 message, 64 bit
     cap 0d[b0] = PCI Bridge card=0x12341022
     cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 ecap 000b[100] = unknown 1
 atapci0@pci0:0:17:0:    class=0x010601 card=0x43911849 chip=0x43911002
 rev=0x40 hdr=0x00
     cap 12[70] = SATA Index-Data Pair
     cap 13[a4] = PCI Advanced Features: FLR TP
 ohci0@pci0:0:18:0:      class=0x0c0310 card=0x43971849 chip=0x43971002
 rev=0x00 hdr=0x00
 ehci0@pci0:0:18:2:      class=0x0c0320 card=0x43961849 chip=0x43961002
 rev=0x00 hdr=0x00
     cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 ohci1@pci0:0:19:0:      class=0x0c0310 card=0x43971849 chip=0x43971002
 rev=0x00 hdr=0x00
 ehci1@pci0:0:19:2:      class=0x0c0320 card=0x43961849 chip=0x43961002
 rev=0x00 hdr=0x00
     cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 none0@pci0:0:20:0:      class=0x0c0500 card=0x43851849 chip=0x43851002
 rev=0x42 hdr=0x00
 atapci1@pci0:0:20:1:    class=0x01018a card=0x439c1849 chip=0x439c1002
 rev=0x40 hdr=0x00
 hdac1@pci0:0:20:2:      class=0x040300 card=0x18921849 chip=0x43831002
 rev=0x40 hdr=0x00
     cap 01[50] = powerspec 2  supports D0 D3  current D0
 isab0@pci0:0:20:3:      class=0x060100 card=0x439d1849 chip=0x439d1002
 rev=0x40 hdr=0x00
 pcib2@pci0:0:20:4:      class=0x060401 card=0x00000000 chip=0x43841002
 rev=0x40 hdr=0x01
 ohci2@pci0:0:20:5:      class=0x0c0310 card=0x43991849 chip=0x43991002
 rev=0x00 hdr=0x00
 pcib3@pci0:0:21:0:      class=0x060400 card=0x00001002 chip=0x43a01002
 rev=0x00 hdr=0x01
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x1)
     cap 05[a0] = MSI supports 1 message, 64 bit
     cap 0d[b0] = PCI Bridge card=0x00001002
     cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 ecap 000b[100] = unknown 1
 pcib4@pci0:0:21:1:      class=0x060400 card=0x00001002 chip=0x43a11002
 rev=0x00 hdr=0x01
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
     cap 05[a0] = MSI supports 1 message, 64 bit
     cap 0d[b0] = PCI Bridge card=0x00001002
     cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 ecap 000b[100] = unknown 1
 pcib5@pci0:0:21:2:      class=0x060400 card=0x00001002 chip=0x43a21002
 rev=0x00 hdr=0x01
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
     cap 05[a0] = MSI supports 1 message, 64 bit
     cap 0d[b0] = PCI Bridge card=0x00001002
     cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
 ecap 000b[100] = unknown 1
 ohci3@pci0:0:22:0:      class=0x0c0310 card=0x43971849 chip=0x43971002
 rev=0x00 hdr=0x00
 ehci2@pci0:0:22:2:      class=0x0c0320 card=0x43961849 chip=0x43961002
 rev=0x00 hdr=0x00
     cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
 hostb1@pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x17001022
 rev=0x43 hdr=0x00
 hostb2@pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x17011022
 rev=0x00 hdr=0x00
 hostb3@pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x17021022
 rev=0x00 hdr=0x00
 hostb4@pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x17031022
 rev=0x00 hdr=0x00
     cap 0f[f0] = unknown
 hostb5@pci0:0:24:4:     class=0x060000 card=0x00000000 chip=0x17041022
 rev=0x00 hdr=0x00
 hostb6@pci0:0:24:5:     class=0x060000 card=0x00000000 chip=0x17181022
 rev=0x00 hdr=0x00
 hostb7@pci0:0:24:6:     class=0x060000 card=0x00000000 chip=0x17161022
 rev=0x00 hdr=0x00
 hostb8@pci0:0:24:7:     class=0x060000 card=0x00000000 chip=0x17191022
 rev=0x00 hdr=0x00
 em0@pci0:1:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 
hdr=0x00
     cap 01[c8] = powerspec 2  supports D0 D3  current D0
     cap 05[d0] = MSI supports 1 message, 64 bit
     cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
     cap 11[a0] = MSI-X supports 5 messages in map 0x1c enabled
 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
 ecap 0003[140] = Serial 1 001b21ffffa953fa
 re0@pci0:4:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 
hdr=0x00
     cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 05[50] = MSI supports 1 message, 64 bit enabled with 1 message
     cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
     cap 11[b0] = MSI-X supports 4 messages in map 0x20
     cap 03[d0] = VPD
 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
 ecap 0002[140] = VC 1 max VC0
 ecap 0003[160] = Serial 1 01000000684ce000
 none1@pci0:5:0:0:       class=0x0c0330 card=0x70231849 chip=0x70231b6f
 rev=0x01 hdr=0x00
     cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
     cap 05[70] = MSI supports 4 messages, 64 bit, vector masks
     cap 10[a0] = PCI-Express 2 endpoint max data 128(1024) link x1(x1)
 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 ecap 0003[190] = Serial 1 0101010101010101
 
 i have not tried 9 yet at all.
 
 
 ---------- Original Message -----------
 From: Peter Jeremy <peterjer...@acm.org>
 To: Jason Seidel <jsei...@unixsystem.org>
 Cc: freebsd-gnats-sub...@freebsd.org
 Sent: Sun, 31 Jul 2011 09:06:31 +1000
 Subject: Re: usb/159274: USB 3.0 Etron EJ168A does not work.
 
 > On 2011-Jul-28 21:25:45 +0000, Jason Seidel <jsei...@unixsystem.org> 
 > wrote:
 > >I have an ASrock E350M1/USB3 motherboard running freebsd 8.2.
 > >If I enable xhci in the kernel, not only does it not detect the usb 3.0
 controler, it causes the machine to go into a constant booting loop.
 > >
 > >I have tried just adding "device xhci" to the kernel and also building the
 kernel by removing ehci, it still causing the machine to go into a booting 
loop.
 > 
 > Unfortunately, this isn't enough information to allow the problem to 
 > be investigated. - What is the PCI id of your USB3 controller?  This 
 > is available from pciconf. - At what point does the system reboot & 
 > what is displayed immediately  before the reboot. - What happens if 
 > you boot GENERIC and kldload xhci? - Can you gheck if the problem 
 > still exists with 9-CURRENT
 > 
 > -- 
 > Peter Jeremy
 ------- End of Original Message -------
 
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to