Hi USB folks,
For external disk enclosure, trade name "ICY BOX"
/var/log messages shows USB configuring for 1.000MB/s

The cardboard box I bought it in from shop says 
        1 x 2.5" SATA, 1 x USB 3.0 IB-231StU3 
        http://www.icybox.de    ->
        http://www.raidsonic.de/en/products/details.php?we_objectID=7564
        Clicking Spec says: USB 3.0 up to 5 Gbit/s

The HP notebook
        http://berklix.com/~jhs/hardware/hp/pavilion/dm3-1155ea
has 4 USB 2.0 ports.

If I connect a USB stick on the same port, the notebook offers 40M.

The disk on all 4 ports only offers 1M.
I tried external power to disk too, no help
        (well I'd hoped maybe low V might have sabotaged negotiation - long 
shot ;-)

I suspect/ hope I just need to do a quirk table entry ? Hints please ?

8.2-RELEASE amd64,
I'd prefer to stay on 8.2 but I have a smallish space for a temporary current 
or 9 if I have to.

/var/log/messages:
        ugen0.2: <01234567890123456789012345678901234567890123> at usbus0
        umass0: <01234567890123456789012345678901234567890123 
012345678901234567890123456789012345678901234567, class 0/0, rev 2.10/1.00, 
addr 2> on usbus0
        umass0:  SCSI over Bulk-Only; quirks = 0x0000
        umass0:0:0:-1: Attached to scbus0
        da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
        da0: <WDC WD25 00BEKT-60A25T1 02.0> Fixed Direct Access SCSI-5 device 
        da0: 1.000MB/s transfers
        da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)

/sbin/devd -f /dev/null -d -D   (extract)

        Processing event '+ugen0.2 vendor=0x174c product=0x55aa devclass=0x00 
devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 at port=2 on 
ugen0.1'
        Pushing table
        setting device-name=ugen0.2
        setting vendor=0x174c
        setting product=0x55aa
        setting devclass=0x00
        setting devsubclass=0x00
        setting sernum=0123456789ABCDEF0188
        setting release=0x0100
        Processing attach event
        Popping table
        Processing event '!system=USB subsystem=DEVICE type=ATTACH cdev=ugen0.2 
vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 
sernum="0123456789ABCDEF0188" release=0x0100 mode=host port=2 parent=ugen0.1'
        Pushing table
        setting system=USB
        setting subsystem=DEVICE
        setting type=ATTACH
        setting cdev=ugen0.2
        setting vendor=0x174c
        setting product=0x55aa
        setting devclass=0x00
        setting devsubclass=0x00
        setting sernum=0123456789ABCDEF0188
        setting release=0x0100
        setting mode=host
        setting port=2
        setting parent=ugen0.1
        Processing notify event
        Popping table
        Processing event '!system=USB subsystem=INTERFACE type=ATTACH 
cdev=ugen0.2 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 
sernum="0123456789ABCDEF0188" release=0x0100 mode=host interface=0 endpoints=2 
intclass=0x08 intsubclass=0x06 intprotocol=0x50'
        Pushing table
        setting system=USB
        setting subsystem=INTERFACE
        setting type=ATTACH
        setting cdev=ugen0.2
        setting vendor=0x174c
        setting product=0x55aa
        setting devclass=0x00
        setting devsubclass=0x00
        setting sernum=0123456789ABCDEF0188
        setting release=0x0100
        setting mode=host
        setting interface=0
        setting endpoints=2
        setting intclass=0x08
        setting intsubclass=0x06
        setting intprotocol=0x50
        Processing notify event
        Popping table
        Processing event '? at bus=1 hubaddr=2 port=0 devaddr=2 interface=0 
vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 
sernum="0123456789ABCDEF0188" release=0x0100 intclass=0x08 intsubclass=0x06 on 
uhub0'
        Pushing table
        setting bus=1
        setting hubaddr=2
        setting port=0
        setting devaddr=2
        setting interface=0
        setting vendor=0x174c
        setting product=0x55aa
        setting devclass=0x00
        setting devsubclass=0x00
        setting sernum=0123456789ABCDEF0188
        setting release=0x0100
        setting intclass=0x08
        setting intsubclass=0x06
        setting bus=uhub0
        Processing nomatch event
        Popping table
        Processing event '+umass0 vendor=0x174c product=0x55aa devclass=0x00 
devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 intclass=0x08 
intsubclass=0x06 at bus=1 hubaddr=2 port=0 devaddr=2 interface=0 vendor=0x174c 
product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" 
release=0x0100 intclass=0x08 intsubclass=0x06 on uhub0'
        Pushing table
        setting device-name=umass0
        setting vendor=0x174c
        setting product=0x55aa
        setting devclass=0x00
        setting devsubclass=0x00
        setting sernum=0123456789ABCDEF0188
        setting release=0x0100
        setting intclass=0x08
        setting intsubclass=0x06
        Processing attach event
        Popping table
        Processing event '!system=DEVFS subsystem=CDEV type=CREATE cdev=pass0'
        Pushing table
        setting system=DEVFS
        setting subsystem=CDEV
        setting type=CREATE
        setting cdev=pass0

Cheers,
Julian
-- 
Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com
 Reply below not above, cumulative like a play script, & indent with "> ".
 Format: Plain text. Not HTML, multipart/alternative, base64, quoted-printable.
        Mail from @yahoo dumped @berklix.  http://berklix.org/yahoo/
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to