>Number: 171262 >Category: usb >Synopsis: plug in sdhc via usb reader reboots machine >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Sep 02 21:10:11 UTC 2012 >Closed-Date: >Last-Modified: >Originator: Waitman Gobble >Release: FreeBSD 9.1-RC1 >Organization: Waitman Gobble >Environment: FreeBSD kamira.waitman.net 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 04:25:06 UTC 2012 r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
>Description: was dumping sdhc cards to ntfs-3g mounted usb drive (8 cards successfully, then inserting 9th card rebooted machine) this in logs 45 times: Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) (then machine reboot.) full log starting from insert: Sep 3 04:36:54 kamira kernel: ugen1.2: <Generic> at usbus1 Sep 3 04:36:54 kamira kernel: umass1: <Generic USB Storage, class 0/0, rev 2.00/2.07, addr 2> on usbus1 Sep 3 04:36:54 kamira kernel: umass1: SCSI over Bulk-Only; quirks = 0x4100 Sep 3 04:36:54 kamira kernel: umass1:6:1:-1: Attached to scbus6 Sep 3 04:36:54 kamira kernel: da1 at umass-sim1 bus 1 scbus6 target 0 lun 0 Sep 3 04:36:54 kamira kernel: da1: <Generic STORAGE DEVICE 0207> Removable Direct Access SCSI-0 device Sep 3 04:36:54 kamira kernel: da1: 40.000MB/s transfers Sep 3 04:36:54 kamira kernel: da1: 15287MB (31307776 512 byte sectors: 255H 63S/T 1948C) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:36:59 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:36:59 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:36:59 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:36:59 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:36:59 kamira kernel: fsync: giving up on dirty Sep 3 04:36:59 kamira kernel: 0xfffffe003d70fd20: tag devfs, type VCHR Sep 3 04:36:59 kamira kernel: usecount 1, writecount 0, refcount 482 mountedhere 0xfffffe007fe62800 Sep 3 04:36:59 kamira kernel: flags (VI(0x200)) Sep 3 04:36:59 kamira kernel: v_object 0xfffffe0041cea570 ref 0 pages 480 Sep 3 04:36:59 kamira kernel: lock type devfs: UNLOCKED Sep 3 04:36:59 kamira kernel: dev da1s1 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:02 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:02 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:02 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:02 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:02 kamira kernel: fsync: giving up on dirty Sep 3 04:37:02 kamira kernel: 0xfffffe003d70fd20: tag devfs, type VCHR Sep 3 04:37:02 kamira kernel: usecount 1, writecount 0, refcount 482 mountedhere 0xfffffe007fe62800 Sep 3 04:37:02 kamira kernel: flags (VI(0x200)) Sep 3 04:37:02 kamira kernel: v_object 0xfffffe0041cea570 ref 0 pages 480 Sep 3 04:37:02 kamira kernel: lock type devfs: UNLOCKED Sep 3 04:37:02 kamira kernel: dev da1s1 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:16 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:16 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Retrying command (per sense data) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): WRITE(10). CDB: 2a 0 0 0 22 28 0 0 8 0 Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): SCSI sense: HARDWARE FAILURE asc:4b,0 (Data phase error) Sep 3 04:37:16 kamira kernel: (da1:umass-sim1:1:0:0): Error 5, Retries exhausted Sep 3 04:37:16 kamira kernel: g_vfs_done():da1s1[WRITE(offset=282624, length=4096)]error = 5 Sep 3 04:37:16 kamira kernel: fsync: giving up on dirty Sep 3 04:37:16 kamira kernel: 0xfffffe003d70fd20: tag devfs, type VCHR Sep 3 04:37:16 kamira kernel: usecount 1, writecount 0, refcount 482 mountedhere 0xfffffe007fe62800 Sep 3 04:37:16 kamira kernel: flags (VI(0x200)) Sep 3 04:37:16 kamira kernel: v_object 0xfffffe0041cea570 ref 0 pages 480 Sep 3 04:37:16 kamira kernel: lock type devfs: UNLOCKED Sep 3 04:37:16 kamira kernel: dev da1s1 Sep 3 04:37:21 kamira kernel: ugen1.2: <Generic> at usbus1 (disconnected) Sep 3 04:37:21 kamira kernel: umass1: at uhub1, port 4, addr 2 (disconnected) Sep 3 04:37:21 kamira kernel: (da1:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs Sep 3 04:37:21 kamira kernel: (pass2:(da1:umass-sim1:1:umass-sim1:1:0:0:0): passdevgonecb: devfs entry is gone Sep 3 04:37:21 kamira kernel: 0): removing device entry Sep 3 04:37:59 kamira syslogd: kernel boot file is /boot/kernel/kernel Sep 3 04:37:59 kamira kernel: Copyright (c) 1992-2012 The FreeBSD Project. Sep 3 04:37:59 kamira kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 3 04:37:59 kamira kernel: The Regents of the University of California. All rights reserved. Sep 3 04:37:59 kamira kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Sep 3 04:37:59 kamira kernel: FreeBSD 9.1-RC1 #0: Tue Aug 14 04:25:06 UTC 2012 Sep 3 04:37:59 kamira kernel: r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Sep 3 04:37:59 kamira kernel: CPU: AMD A4-3300 APU with Radeon(tm) HD Graphics (2493.80-MHz K8-class CPU) Sep 3 04:37:59 kamira kernel: Origin = "AuthenticAMD" Id = 0x300f10 Family = 12 Model = 1 Stepping = 0 Sep 3 04:37:59 kamira kernel: Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Sep 3 04:37:59 kamira kernel: Features2=0x802009<SSE3,MON,CX16,POPCNT> Sep 3 04:37:59 kamira kernel: AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> Sep 3 04:37:59 kamira kernel: AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> Sep 3 04:37:59 kamira kernel: TSC: P-state invariant, performance statistics Sep 3 04:37:59 kamira kernel: real memory = 4294967296 (4096 MB) Sep 3 04:37:59 kamira kernel: avail memory = 3573714944 (3408 MB) Sep 3 04:37:59 kamira kernel: Event timer "LAPIC" quality 400 Sep 3 04:37:59 kamira kernel: ACPI APIC Table: <GBT GBTUACPI> Sep 3 04:37:59 kamira kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Sep 3 04:37:59 kamira kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) Sep 3 04:37:59 kamira kernel: cpu0 (BSP): APIC ID: 0 Sep 3 04:37:59 kamira kernel: cpu1 (AP): APIC ID: 1 Sep 3 04:37:59 kamira kernel: ioapic0: Changing APIC ID to 2 Sep 3 04:37:59 kamira kernel: ioapic0 <Version 2.1> irqs 0-23 on motherboard Sep 3 04:37:59 kamira kernel: kbd1 at kbdmux0 Sep 3 04:37:59 kamira kernel: ctl: CAM Target Layer loaded Sep 3 04:37:59 kamira kernel: acpi0: <GBT GBTUACPI> on motherboard Sep 3 04:37:59 kamira kernel: acpi0: Power Button (fixed) Sep 3 04:37:59 kamira kernel: acpi0: reservation of 0, a0000 (3) failed Sep 3 04:37:59 kamira kernel: acpi0: reservation of 100000, cfcd0000 (3) failed Sep 3 04:37:59 kamira kernel: cpu0: <ACPI CPU> on acpi0 Sep 3 04:37:59 kamira kernel: cpu1: <ACPI CPU> on acpi0 Sep 3 04:37:59 kamira kernel: attimer0: <AT timer> port 0x40-0x43 on acpi0 Sep 3 04:37:59 kamira kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Sep 3 04:37:59 kamira kernel: Event timer "i8254" frequency 1193182 Hz quality 100 Sep 3 04:37:59 kamira kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Sep 3 04:37:59 kamira kernel: Timecounter "HPET" frequency 14318180 Hz quality 950 Sep 3 04:37:59 kamira kernel: Event timer "HPET" frequency 14318180 Hz quality 450 Sep 3 04:37:59 kamira kernel: Event timer "HPET1" frequency 14318180 Hz quality 450 Sep 3 04:37:59 kamira kernel: Event timer "HPET2" frequency 14318180 Hz quality 450 Sep 3 04:37:59 kamira kernel: atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 Sep 3 04:37:59 kamira kernel: Event timer "RTC" frequency 32768 Hz quality 0 Sep 3 04:37:59 kamira kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 Sep 3 04:37:59 kamira kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 Sep 3 04:37:59 kamira kernel: acpi_button0: <Power Button> on acpi0 Sep 3 04:37:59 kamira kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Sep 3 04:37:59 kamira kernel: pci0: <ACPI PCI bus> on pcib0 Sep 3 04:37:59 kamira kernel: vgapci0: <VGA-compatible display> port 0xf800-0xf8ff mem 0xd0000000-0xdfffffff,0xfdfc0000-0xfdffffff irq 18 at device 1.0 on pci0 Sep 3 04:37:59 kamira kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 Sep 3 04:37:59 kamira kernel: pci1: <ACPI PCI bus> on pcib1 Sep 3 04:37:59 kamira kernel: re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdcff000-0xfdcfffff,0xfdcf8000-0xfdcfbfff irq 16 at device 0.0 on pci1 Sep 3 04:37:59 kamira kernel: re0: Using 1 MSI-X message Sep 3 04:37:59 kamira kernel: re0: Chip rev. 0x2c800000 Sep 3 04:37:59 kamira kernel: re0: MAC rev. 0x00000000 Sep 3 04:37:59 kamira kernel: miibus0: <MII bus> on re0 Sep 3 04:37:59 kamira kernel: rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 Sep 3 04:37:59 kamira kernel: rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow Sep 3 04:37:59 kamira kernel: re0: Ethernet address: 90:2b:34:83:1b:b2 Sep 3 04:37:59 kamira kernel: atapci0: <AMD ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f7ff irq 19 at device 17.0 on pci0 Sep 3 04:37:59 kamira kernel: ata2: <ATA channel> at channel 0 on atapci0 Sep 3 04:37:59 kamira kernel: ata3: <ATA channel> at channel 1 on atapci0 Sep 3 04:37:59 kamira kernel: ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 18 at device 18.0 on pci0 Sep 3 04:37:59 kamira kernel: usbus0 on ohci0 Sep 3 04:37:59 kamira kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02d000-0xfe02d0ff irq 17 at device 18.2 on pci0 Sep 3 04:37:59 kamira kernel: usbus1: EHCI version 1.0 Sep 3 04:37:59 kamira kernel: usbus1 on ehci0 Sep 3 04:37:59 kamira kernel: ohci1: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.0 on pci0 Sep 3 04:37:59 kamira kernel: usbus2 on ohci1 Sep 3 04:37:59 kamira kernel: ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02b000-0xfe02b0ff irq 17 at device 19.2 on pci0 Sep 3 04:37:59 kamira kernel: usbus3: EHCI version 1.0 Sep 3 04:37:59 kamira kernel: usbus3 on ehci1 Sep 3 04:37:59 kamira kernel: pci0: <serial bus, SMBus> at device 20.0 (no driver attached) Sep 3 04:37:59 kamira kernel: atapci1: <AMD ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 Sep 3 04:37:59 kamira kernel: ata0: <ATA channel> at channel 0 on atapci1 Sep 3 04:37:59 kamira kernel: ata1: <ATA channel> at channel 1 on atapci1 Sep 3 04:37:59 kamira kernel: hdac0: <Generic (0x780d1022) HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 Sep 3 04:37:59 kamira kernel: isab0: <PCI-ISA bridge> at device 20.3 on pci0 Sep 3 04:37:59 kamira kernel: isa0: <ISA bus> on isab0 Sep 3 04:37:59 kamira kernel: pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 Sep 3 04:37:59 kamira kernel: pci2: <ACPI PCI bus> on pcib2 Sep 3 04:37:59 kamira kernel: ohci2: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 20.5 on pci0 Sep 3 04:37:59 kamira kernel: usbus4 on ohci2 Sep 3 04:37:59 kamira kernel: ohci3: <OHCI (generic) USB controller> mem 0xfe029000-0xfe029fff irq 18 at device 22.0 on pci0 Sep 3 04:37:59 kamira kernel: usbus5 on ohci3 Sep 3 04:37:59 kamira kernel: ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfe028000-0xfe0280ff irq 17 at device 22.2 on pci0 Sep 3 04:37:59 kamira kernel: usbus6: EHCI version 1.0 Sep 3 04:37:59 kamira kernel: usbus6 on ehci2 Sep 3 04:37:59 kamira kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Sep 3 04:37:59 kamira kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 Sep 3 04:37:59 kamira kernel: sc0: <System console> at flags 0x100 on isa0 Sep 3 04:37:59 kamira kernel: sc0: VGA <16 virtual consoles, flags=0x300> Sep 3 04:37:59 kamira kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Sep 3 04:37:59 kamira kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Sep 3 04:37:59 kamira kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Sep 3 04:37:59 kamira kernel: kbd0 at atkbd0 Sep 3 04:37:59 kamira kernel: atkbd0: [GIANT-LOCKED] Sep 3 04:37:59 kamira kernel: ppc0: cannot reserve I/O port range Sep 3 04:37:59 kamira kernel: hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Sep 3 04:37:59 kamira kernel: Timecounters tick every 1.000 msec Sep 3 04:37:59 kamira kernel: hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 Sep 3 04:37:59 kamira kernel: hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 Sep 3 04:37:59 kamira kernel: pcm0: <Realtek ALC887 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,26 on hdaa0 Sep 3 04:37:59 kamira kernel: pcm1: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 Sep 3 04:37:59 kamira kernel: pcm2: <Realtek ALC887 (Front Analog Mic)> at nid 25 on hdaa0 Sep 3 04:37:59 kamira kernel: usbus0: 12Mbps Full Speed USB v1.0 Sep 3 04:37:59 kamira kernel: usbus1: 480Mbps High Speed USB v2.0 Sep 3 04:37:59 kamira kernel: usbus2: 12Mbps Full Speed USB v1.0 Sep 3 04:37:59 kamira kernel: usbus3: 480Mbps High Speed USB v2.0 Sep 3 04:37:59 kamira kernel: usbus4: 12Mbps Full Speed USB v1.0 Sep 3 04:37:59 kamira kernel: usbus5: 12Mbps Full Speed USB v1.0 Sep 3 04:37:59 kamira kernel: usbus6: 480Mbps High Speed USB v2.0 Sep 3 04:37:59 kamira kernel: ugen0.1: <AMD> at usbus0 Sep 3 04:37:59 kamira kernel: uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Sep 3 04:37:59 kamira kernel: ugen1.1: <AMD> at usbus1 Sep 3 04:37:59 kamira kernel: uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Sep 3 04:37:59 kamira kernel: ugen2.1: <AMD> at usbus2 Sep 3 04:37:59 kamira kernel: uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 Sep 3 04:37:59 kamira kernel: ugen3.1: <AMD> at usbus3 Sep 3 04:37:59 kamira kernel: uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 Sep 3 04:37:59 kamira kernel: ugen4.1: <AMD> at usbus4 Sep 3 04:37:59 kamira kernel: uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 Sep 3 04:37:59 kamira kernel: ugen5.1: <AMD> at usbus5 Sep 3 04:37:59 kamira kernel: uhub5: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 Sep 3 04:37:59 kamira kernel: ugen6.1: <AMD> at usbus6 Sep 3 04:37:59 kamira kernel: uhub6: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 Sep 3 04:37:59 kamira kernel: uhub4: 2 ports with 2 removable, self powered Sep 3 04:37:59 kamira kernel: uhub5: 4 ports with 4 removable, self powered Sep 3 04:37:59 kamira kernel: uhub0: 5 ports with 5 removable, self powered Sep 3 04:37:59 kamira kernel: uhub2: 5 ports with 5 removable, self powered Sep 3 04:37:59 kamira kernel: uhub6: 4 ports with 4 removable, self powered Sep 3 04:37:59 kamira kernel: uhub1: 5 ports with 5 removable, self powered Sep 3 04:37:59 kamira kernel: uhub3: 5 ports with 5 removable, self powered Sep 3 04:37:59 kamira kernel: ugen3.2: <Seagate> at usbus3 Sep 3 04:37:59 kamira kernel: umass0: <Seagate FA GoFlex Desk, class 0/0, rev 2.10/1.00, addr 2> on usbus3 Sep 3 04:37:59 kamira kernel: umass0: SCSI over Bulk-Only; quirks = 0x4100 Sep 3 04:37:59 kamira kernel: umass0:5:0:-1: Attached to scbus5 Sep 3 04:37:59 kamira kernel: ugen1.2: <Generic> at usbus1 Sep 3 04:37:59 kamira kernel: umass1: <Generic USB Storage, class 0/0, rev 2.00/2.07, addr 2> on usbus1 Sep 3 04:37:59 kamira kernel: umass1: SCSI over Bulk-Only; quirks = 0x4100 Sep 3 04:37:59 kamira kernel: umass1:6:1:-1: Attached to scbus6 Sep 3 04:37:59 kamira kernel: ada0 at ata2 bus 0 scbus0 target 0 lun 0 Sep 3 04:37:59 kamira kernel: ada0: <WDC WD1002FAEX-00Y9A0 05.01D05> ATA-8 SATA 3.x device Sep 3 04:37:59 kamira kernel: ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes) Sep 3 04:37:59 kamira kernel: ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) Sep 3 04:37:59 kamira kernel: ada0: Previously was known as ad4 Sep 3 04:37:59 kamira kernel: da1 at umass-sim1 bus 1 scbus6 target 0 lun 0 Sep 3 04:37:59 kamira kernel: da1: <Generic STORAGE DEVICE 0207> Removable Direct Access SCSI-0 device Sep 3 04:37:59 kamira kernel: da1: 40.000MB/s transfers Sep 3 04:37:59 kamira kernel: da1: 15287MB (31307776 512 byte sectors: 255H 63S/T 1948C) Sep 3 04:37:59 kamira kernel: da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 Sep 3 04:37:59 kamira kernel: da0: <Seagate FA GoFlex Desk 0D0B> Fixed Direct Access SCSI-0 device Sep 3 04:37:59 kamira kernel: da0: 40.000MB/s transfers Sep 3 04:37:59 kamira kernel: da0: 2861588MB (732566645 4096 byte sectors: 255H 63S/T 45600C) Sep 3 04:37:59 kamira kernel: SMP: AP CPU #1 Launched! Sep 3 04:37:59 kamira kernel: Timecounter "TSC-low" frequency 9741414 Hz quality 800 Sep 3 04:37:59 kamira kernel: Trying to mount root from ufs:/dev/ada0a [rw]... Sep 3 04:37:59 kamira kernel: WARNING: / was not properly dismounted Sep 3 04:37:59 kamira ntpd[1191]: ntpd 4.2.4p5-a (1) Sep 3 04:37:59 kamira kernel: . Sep 3 04:37:59 kamira kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Sep 3 04:38:00 kamira kernel: re0: link state changed to UP Sep 3 04:38:05 kamira kernel: ugen1.2: <Generic> at usbus1 (disconnected) Sep 3 04:38:05 kamira kernel: umass1: at uhub1, port 4, addr 2 (disconnected) Sep 3 04:38:05 kamira kernel: (da1:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs Sep 3 04:38:05 kamira kernel: (pass2:(da1:umass-sim1:1:umass-sim1:1:0:0:0): passdevgonecb: devfs entry is gone Sep 3 04:38:05 kamira kernel: 0): removing device entry Sep 3 04:38:47 kamira su: waitman to root on /dev/pts/0 Sep 3 04:39:17 kamira ntpd[1192]: time correction of -53911 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. Sep 3 04:41:28 kamira ntfs-3g[1767]: Version 2011.4.12 external FUSE 27 Sep 3 04:41:28 kamira ntfs-3g[1767]: Mounted /dev/da0s1 (Read-Write, label "FreeAgent GoFlex Drive", NTFS 3.1) Sep 3 04:41:28 kamira ntfs-3g[1767]: Cmdline options: Sep 3 04:41:28 kamira ntfs-3g[1767]: Mount options: allow_other,nonempty,atime,fsname=/dev/da0s1 Sep 3 04:41:28 kamira ntfs-3g[1767]: Ownership and permissions disabled, configuration type 1 >How-To-Repeat: reader in usb port with sdhc card seems to work 'most of the time' but for some reason caused machine reboot in one instance. thank you. >Fix: >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
