The following reply was made to PR usb/174254; it has been noted by GNATS. From: Hans Petter Selasky <[email protected]> To: [email protected], [email protected] Cc: [email protected] Subject: Re: usb/174254: MIDI keyboard not recognised Date: Fri, 7 Dec 2012 11:07:11 +0100
On Friday 07 December 2012 10:03:15 Walter C. Pelissero wrote: > >Number: 174254 > >Category: usb > >Synopsis: MIDI keyboard not recognised > >Confidential: no > >Severity: serious > >Priority: medium > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Fri Dec 07 09:10:00 UTC 2012 > >Closed-Date: > >Last-Modified: > >Originator: Walter C. Pelissero > >Release: FreeBSD 9.1-PRERELEASE amd64 > >Organization: > > >Environment: > System: FreeBSD scylla.home.lan 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: > Wed Aug 8 16:38:32 CEST 2012 > [email protected]:/usr/obj/usr/src/sys/GA870AUD3 amd64 > > >Description: > Yamaha E423 doesn't seem to be recognised as MIDI device by > the system. All that is available is a /dev/ugen. > > >How-To-Repeat: > Plug the keyboard in. > > # kldstat | fgrep snd > 9 1 0xffffffff80ce5000 3cce0 snd_hda.ko > 52 1 0xffffffff812f5000 828d snd_uaudio.ko > > # cat /dev/midistat > FreeBSD Midi Driver (midi2) > No devices installed. > > # ls /dev/umidi* > ls: No match. > > # dmesg > [...] > usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) > usbd_setup_device_desc: getting device descriptor at addr 4 failed, > USB_ERR_IOERROR usbd_req_re_enumerate: addr=4, set address failed! > (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device > descriptor at addr 4 failed, USB_ERR_IOERROR usbd_req_re_enumerate: > addr=4, set address failed! (USB_ERR_IOERROR, ignored) > usbd_setup_device_desc: getting device descriptor at addr 4 failed, > USB_ERR_IOERROR ugen2.4: <Unknown> at usbus2 (disconnected) > uhub_reattach_port: could not allocate new device > ugen2.4: <YAMAHA Corporation> at usbus2 > > # usbconfig | fgrep YAMAHA > ugen2.4: <DigitalKBD YAMAHA Corporation> at usbus2, cfg=0 md=HOST > spd=FULL > (12Mbps) pwr=ON > > # usbconfig dump_device_desc > [...] > ugen2.4: <DigitalKBD YAMAHA Corporation> at usbus2, cfg=0 md=HOST > spd=FULL > (12Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x0000 > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0008 > idVendor = 0x0499 > idProduct = 0x1037 > bcdDevice = 0x0100 > iManufacturer = 0x0001 <YAMAHA Corporation> > iProduct = 0x0002 <DigitalKBD> > iSerialNumber = 0x0000 <no string> > bNumConfigurations = 0x0001 Hi, Can you try this: usbconfig -d 2.4 add_quirk UQ_AU_VENDOR_CLASS Then replug the device? --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
