i forgot uname -a FreeBSD 10.0-CURRENT #0 r244586:
2012/12/22 Вячеслав Агапов <agapov.sl...@gmail.com> > Hello all. > > I use usb wi-fi d-link dwa-125 > What I do: > 1. insert usb > 2. ugen2.2: <Ralink> at usbus2 > 3. usbconfig -d 2.2 dump_device_desc > ugen2.2: <11n Adapter Ralink> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x0000 > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x2001 > [b] idProduct = 0x3c1e [/b] > bcdDevice = 0x0101 > iManufacturer = 0x0001 <Ralink> > iProduct = 0x0002 <11n Adapter> > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > 4. > in /usr/src/sys/dev/usb/usbdevs added > product DLINK DWA125 0x3c1e DWA-125 > in /usr/src/sys/dev/usb/usbdevs added > RUN_DEV(DLINK, DWA125), > and then > cd /usr/src/sys/modules/usb/run > make > 5. load new kernel module > kldload ./if_run.ko > > 6. dmesg > run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2 > run0: MAC/BBP RT5390 (rev 0x0503), RF unknown (MIMO 1T1R), address > bc:f6:85:f8:d1:90 > > 7. ifconfig wlan0 create wlandev run0 wlanmode hostap > ifconfig wlan0 create wlandev run0 wlanmode hostap > > 8. After this, my usb is crashed > in dmesg > wlan0: Ethernet address: bc:f6:85:f8:d1:90 > run0: firmware RT3071 ver. 0.236 loaded > wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost > run0: at uhub2, port 4, addr 2 (disconnected) > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, > ignored) > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, > ignored) > ugen2.2: <Ralink> at usbus2 (disconnected) > > Help me with this, please. > > _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
