Hans Petter Selasky <hsela...@c2i.net> wrote ..
> On Sunday 20 January 2013 09:06:51 Waitman Gobble wrote:
> > Hi,
> > 
> > I have a SanDisk SDDR-289 hooked up through a pci-e interface card w/ VIA
> > VL800 chipset With it plugged it, when I reboot it takes 5-6 minutes to
> > shut down and 15 to come back up.
> > 
> > Jan 18 20:58:20 kamira kernel: ugen0.4 (: <SanDisk> at usbus0
> > Jan 18 20:58:20 kamira kernel: umass2: <Bulk-In, Bulk-Out, Interface> on
> > usbus0 Jan 18 20:58:20 kamira kernel: umass2:  SCSI over Bulk-Only; quirks
> > = 0x4000 Jan 18 20:58:20 kamira kernel: umass2:7:2:-1: Attached to scbus7
> > Jan 18 20:58:20 kamira kernel: da2 at umass-sim2 bus 2 scbus7 target 0 lun
> > 0 Jan 18 20:58:20 kamira kernel: da2: <SanDisk uSD SDDR-289 1.00>
> > Removable Direct Access SCSI-0
> > 
> > I don't see this model listed in sys/dev/usb/usbdevs, or
> > sys/dev/usb/quirk/usb_quirk.c ..not sure if the 'quirks = 0x4000' refers
> > to something. (?) I have a hunch the problem is related to missing quirks,
> > but I'm not sure.
> > 
> > # uname -a
> > FreeBSD kamira.waitman.net 9.1-RELEASE FreeBSD 9.1-RELEASE #3 r245537M: Sat
> > Jan 19 13:41:28 PST 2013    
> > r...@kamira.waitman.net:/usr/obj/usr/src/sys/BURPLEX  amd64
> 
> There is currently some automagic detection of quirks. You can try to add your
> device to the quirklist in sys/dev/usb/quirk/usb_quirk.c
> 
> --HPS

Hi,

Thanks. I did try just to see what happens, but it seems i need to have the 
device listed in usbdev and I wasn't sure how to list it.

for example, an older product with the same brand name, but conceivably a 
different architecture:

in usb_quirk.c

USB_QUIRK(ONSPEC2, IMAGEMATE_SDDR55, 0x0000, 0xffff,
            UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_GETMAXLUN),

and usbdevs
product ONSPEC2 IMAGEMATE_SDDR55        0xa103  ImageMate SDDR55

i'm not sure where i get this number:0xa103
and if that's all that is needed?


# usbconfig -u 0 -a 4 dump_curr_config_desc
ugen0.4: <USB3.0 Card Reader SanDisk> at usbus0, cfg=0 md=HOST spd=SUPER 
(5.0Gbps) pwr=ON


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x002c 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0004  <SDDR-289>
    bmAttributes = 0x0080 
    bMaxPower = 0x0064 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x0008 
      bInterfaceSubClass = 0x0006 
      bInterfaceProtocol = 0x0050 
      iInterface = 0x0005  <Bulk-In, Bulk-Out, Interface>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0400 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x03
       RAW dump: 
       0x00 | 0x06, 0x30, 0x03, 0x00, 0x00, 0x00


     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0082  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0400 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x03
       RAW dump: 
       0x00 | 0x06, 0x30, 0x03, 0x00, 0x00, 0x00



# usbconfig -u 0 -a 4 dump_device_desc
ugen0.4: <USB3.0 Card Reader SanDisk> at usbus0, cfg=0 md=HOST spd=SUPER 
(5.0Gbps) pwr=ON

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0300 
  bDeviceClass = 0x0000 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0009 
  idVendor = 0x0781 
  idProduct = 0xb6ba 
  bcdDevice = 0x0124 
  iManufacturer = 0x0001  <SanDisk>
  iProduct = 0x0002  <USB3.0 Card Reader>
  iSerialNumber = 0x0003  <11150005027>
  bNumConfigurations = 0x0001 


Thank you,


-- 
Waitman Gobble
San Jose California USA

_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to