Hi,

I picked up a Zalman USB 3.0 flash stick that has problems if its
connected at boot time. If I reboot the box with the stick plugged in
(RELENG_9 from Feb 11), I get the errors below.

xhci_do_command: Command timeout!
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
xhci_do_command: Command timeout!
xhci_do_command: Command timeout!
xhci_do_command: Command timeout!
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus2
xhci_do_command: Command timeout!
Root mount waiting for: usbus2 usbus1 usbus0
xhci_do_command: Command timeout!
xhci_do_command: Command timeout!
uhub3: 4 ports with 4 removable, self powered
xhci_do_command: Command timeout!
xhci_do_command: Command timeout!
uhub4: 6 ports with 6 removable, self powered
xhci_do_command: Command timeout!
Root mount waiting for: usbus1
xhci_do_command: Command timeout!
xhci_do_command: Command timeout!
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT,
ignored)
Root mount waiting for: usbus1
xhci_do_command: Command timeout!
uhub_reattach_port: could not allocate new device

and the device does not show up. I can unplug it and replug it, but it
will not work in the USB 3 port. If I replug it into the 2.x port after
the problematic boot, it works.

If I boot up the box and then plug the stick into the 3.0 port, it works
as expected.

speed is good as well

0{USB3}# dd if=/dev/da0 of=/dev/null bs=1024k count=300
300+0 records in
300+0 records out
314572800 bytes transferred in 3.462889 secs (90841146 bytes/sec)
0{USB3}#
0{USB3}# dd if=/dev/zero of=/dev/da0 count=300 bs=1024k
300+0 records in
300+0 records out
314572800 bytes transferred in 3.577376 secs (87933952 bytes/sec)
0{USB3}#

USB output attached.  Any ideas what the issue might be ?

        ---Mike
-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/
Base Board Information
        Manufacturer: Intel Corporation
        Product Name: DH61BE
        Version: AAG14062-205
        Version: BEH6110H.86A.0109.2012.1221.1455
        Release Date: 12/21/2012
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 4096 kB


ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0019 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040 
    bMaxPower = 0x0000 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0009 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008 
        bInterval = 0x00ff 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 



ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=SAVE


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x001f 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040 
    bMaxPower = 0x0000 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0009 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0002 
        bInterval = 0x00ff 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x00
       RAW dump: 
       0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00




ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0019 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040 
    bMaxPower = 0x0000 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0009 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008 
        bInterval = 0x00ff 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 



ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0019 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00e0 
    bMaxPower = 0x0000 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0009 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0001 
        bInterval = 0x000c 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 



ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0019 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00e0 
    bMaxPower = 0x0000 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0009 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0001 
        bInterval = 0x000c 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 



ugen1.2: <U3M16 SLC Zalman Tech> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=ON


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x002c 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0080 
    bMaxPower = 0x003f 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x0008 
      bInterfaceSubClass = 0x0006 
      bInterfaceProtocol = 0x0050 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0002  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0400 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x0f
       RAW dump: 
       0x00 | 0x06, 0x30, 0x0f, 0x00, 0x00, 0x00


     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0400 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x0f
       RAW dump: 
       0x00 | 0x06, 0x30, 0x0f, 0x00, 0x00, 0x00




ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0009 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0001 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x0000 
  idProduct = 0x0000 
  bcdDevice = 0x0100 
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001 

ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=SAVE

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0300 
  bDeviceClass = 0x0009 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0003 
  bMaxPacketSize0 = 0x0009 
  idVendor = 0x0000 
  idProduct = 0x0000 
  bcdDevice = 0x0100 
  iManufacturer = 0x0001  <0x1033>
  iProduct = 0x0002  <XHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001 

ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0009 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0001 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x0000 
  idProduct = 0x0000 
  bcdDevice = 0x0100 
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001 

ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0009 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0001 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x8087 
  idProduct = 0x0024 
  bcdDevice = 0x0000 
  iManufacturer = 0x0000  <no string>
  iProduct = 0x0000  <no string>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001 

ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0009 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0001 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x8087 
  idProduct = 0x0024 
  bcdDevice = 0x0000 
  iManufacturer = 0x0000  <no string>
  iProduct = 0x0000  <no string>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001 

ugen1.2: <U3M16 SLC Zalman Tech> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=ON

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0300 
  bDeviceClass = 0x0000 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0009 
  idVendor = 0x1f75 
  idProduct = 0x0902 
  bcdDevice = 0x000a 
  iManufacturer = 0x0001  <Zalman Tech>
  iProduct = 0x0002  <U3M16 SLC>
  iSerialNumber = 0x0003  <0902000000000000000000000230>
  bNumConfigurations = 0x0001 

0{USB3}# usbconfig 
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE
ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=SAVE
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE
ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH 
(480Mbps) pwr=SAVE
ugen1.2: <U3M16 SLC Zalman Tech> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) 
pwr=ON
0{USB3}# 

ehci0@pci0:0:26:0:      class=0x0c0320 card=0x200c8086 chip=0x1c2d8086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 Series/C200 Series Chipset Family USB Enhanced Host 
Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf7e28000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP


xhci0@pci0:3:0:0:       class=0x0c0330 card=0x200c8086 chip=0x01941033 rev=0x04 
hdr=0x00
    vendor     = 'NEC Corporation'
    device     = 'uPD720200 USB 3.0 Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 64, base 0xf7c00000, size 8192, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[70] = MSI supports 8 messages, 64 bit 
    cap 11[90] = MSI-X supports 8 messages in map 0x10
    cap 10[a0] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
                 speed 5.0(5.0)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 ffffffffffffffff
ecap 0018[150] = unknown 1
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to