On 11/14/13 15:42, Eitan Adler wrote:
On Thu, Nov 14, 2013 at 2:05 AM, Hans Petter Selasky <h...@bitfrost.no> wrote:
On 11/14/13 05:08, Eitan Adler wrote:

The mouse driver fails to attach when plugging in my USB mouse.

FreeBSD gravity.local 11.0-CURRENT FreeBSD 11.0-CURRENT #5 r257754:
Thu Nov  7 12:12:51 EST 2013
root@gravity.local:/usr/obj/usr/src/sys/EADLER  amd64

 From boot:

[52341] ugen0.2: <Logitech> at usbus0
[52341] ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev
2.00/27.20, addr 11> on usbus0
[52341] ums0: 8 buttons and [XYZT] coordinates ID=0
[54057] ugen0.2: <Logitech> at usbus0 (disconnected)
[54057] ums0: at uhub0, port 1, addr 11 (disconnected)
[54058] xhci_do_command: Command timeout!
[54058] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)


What USB controllers does this system have?

--HPS


[10005 root@gravity (100%) /home/eitan ]#usbconfig
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen2.3: <Lenovo EasyCamera Azurewave> at usbus2, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=ON (500mA)
ugen1.4: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (0mA)
ugen1.3: <Linksys AE1000 Linksys> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (450mA)



pciconf -lv

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to