On 09/10/15 11:12, Karl Pielorz wrote:

I recently bought a NUC 5i3RYK, flashed it to the latest BIOS (8/18/2015
- 0350) and installed FreeBSD 10.2 on it. It seems to work OK - but
there's no USB3 support (Ok, the USB3 controller is detected - but
everything connected runs at USB2). This seems to have happened before,


Possibly you'll need to edit sys/dev/usb/controller/xhci_pci.c and add the PCI ID's for your model under the port-routing section.


freebsd-usb@freebsd.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to