Hi again,

I added the following to /boot/loader.conf on the 11-CURRENT usb memstick :


usb_quirk_load="YES"
boot_multicons="YES"
boot_serial="YES"
comconsole_speed="115200"
console="comconsole,vidconsole"
usbconfig -d ugen0.2 add_quirk NO_6_BYTE

and that seems to let the kernel mount the miniroot:

Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x0438> at usbus1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x0718> at usbus0
umass0: <vendor 0x0718 product 0x0619, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <TDK LoR TF20 PMAP> Removable Direct Access SPC-4 SCSI device
da0: 40.000MB/s transfers
da0: 7384MB (15122432 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0: the secondary GPT header is not in the last LBA.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/FreeBSD_Install: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeBSD_Install: clean, 52158 free (174 frags, 6498 blocks, 0.0% fragmentation)

Thanks for the suggestions!

Cheers,

Noth


On 08/11/15 10:42, Hans Petter Selasky wrote:
On 11/07/15 17:00, Noth wrote:
Hi all,

   I've been directed here by the good folk of #freebsd on Freenode. I'm
betatesting the upcoming PC Engines APU2B4 (
http://pcengines.ch/apu2b4.htm ) on various OSes. I tried the memstick
installers of both 10.2-RELEASE and the 2nd of November snapshot of
11-CURRENT, and neither work, because the kernel can't mount the miniroot:

Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x0438> at usbus1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2>
on usbus1
uhub2: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x0781> at usbus0
umass0: <vendor 0x0781 product 0x5571, class 0/0, rev 2.00/1.26, addr 1>
on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.


Hi,

SCSI command #12 is:

#define INQUIRY                 0x12

That means you might need to set the UQ_MSC_NO_INQUIRY quirk for your device, before it works. In recent 11-current images, this can be done from the loader. See usb_quirk manual page in 11-current.

--HPS

_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to