On 02/28/16 19:44, Larry Rosenman wrote:
On Sun, Feb 28, 2016 at 07:35:56PM +0100, Hans Petter Selasky wrote:
On 02/28/16 18:22, Larry Rosenman wrote:
So, how do I get this device to read my SD cards?


ugen0.5: <USB2.0-CRW Generic> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=ON (500mA)



Can you dump the device and configuration descriptor?

usbconfig -d 0.5 dump_device_desc dump_curr_config_desc

ugen0.5: <USB2.0-CRW Generic> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=ON (500mA)

   bLength = 0x0012
   bDescriptorType = 0x0001
   bcdUSB = 0x0200
   bDeviceClass = 0x00ff  <Vendor specific>
   bDeviceSubClass = 0x00ff
   bDeviceProtocol = 0x00ff
   bMaxPacketSize0 = 0x0040
   idVendor = 0x0bda
   idProduct = 0x0129
   bcdDevice = 0x3960

Hi,

Try to add a USB quirk for your device:

kldload usb_quirk
usbconfig -d 0.5 add_quirk UQ_MSC_FORCE_WIRE_BBB

Then re-plug it.

Can be permanently added to sys/dev/usb/quirk/usb_quirk.c

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to