Given that my usbquirk in /boot/loader.conf works..

hw.usb.quirk.0="0x2357 0x0601 0 0xffff UQ_CFG_INDEX_1"

... don't suppose someone can submit this as a patch for me?


In /sys/dev/usb/quirk/usb_quirk.c

Add...

USB_QUIRK(TPLINK, RTL8153, 0x0000, 0xffff, UQ_CFG_INDEX_1),

In /sys/dev/usb/usbdevs

Add..
        vendor TPLINK           0x2357  TP-LINK

        /* TP-LINK products */
        product TPLINK RTL8153    0x0601    RTL8153 USB 10/100/1000 LAN


On Wed, Nov 8, 2017 at 6:04 PM, Hans Petter Selasky <h...@selasky.org> wrote:

> On 11/08/17 08:55, Kris G wrote:
>
>> Hi,
>>
>> I am finding that I have to run below command each time I plug the USB
>> device mentioned in subject to have ue0 interface appear.
>>
>> usbconfig -d 0.2 set_config 1
>>
>> How do I go about doing this automatically? At the moment I just have the
>> command above in /etc/rc.local but I prefer to fix it properly.
>>
>> Can someone give me some pointers?
>>
>
> Hi,
>
> Have a look here for example:
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221852
>
> There is "UQ_CFG_INDEX_1" and you can also specify it in /boot/loader.conf
> .
>
> man usb_quirk
>
> --HPS
>
>
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to