On 11/27/18 12:53 PM, Tom Jones wrote:
Hi,
I have a Intel Cherryview based laptop with Braswell XHCI. The laptop has two
usb ports, a USB-A port routed to USB3 (this works) and a USB-C port routed a
USB 2 bus.
The USB bus routed to the USB-C port does not appear under FreeBSD.
xhci0: <Intel Braswell USB 3.0 controller> mem 0xa1a00000-0xa1a0ffff at device
20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
There is full (if slightly old) dmesg here:
https://dmesgd.nycbug.org/index.cgi?do=view&id=3213
It is picket up on Linux:
[ 19.200330] uhci_hcd: USB Universal Host Controller Interface driver
[ 19.200827] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 19.200855] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 19.202004] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x0000000081509810
[ 19.202019] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 19.202522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 19.202526] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 19.202529] usb usb1: Product: xHCI Host Controller
[ 19.202534] usb usb1: Manufacturer: Linux 4.18.0-10-generic xhci-hcd
[ 19.202537] usb usb1: SerialNumber: 0000:00:14.0
[ 19.203545] hub 1-0:1.0: USB hub found
[ 19.203579] hub 1-0:1.0: 7 ports detected
[ 19.205628] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 19.205638] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 19.205649] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 19.205764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 4.18
[ 19.205768] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 19.205771] usb usb2: Product: xHCI Host Controller
[ 19.205774] usb usb2: Manufacturer: Linux 4.18.0-10-generic xhci-hcd
[ 19.205777] usb usb2: SerialNumber: 0000:00:14.0
[ 19.206868] hub 2-0:1.0: USB hub found
[ 19.206907] hub 2-0:1.0: 6 ports detected
It is also picked up on NetBSD, but conversations with stejda@ raise some
doubts about support there.
xhci0 at pci0 dev 20 function 0: vendor 8086 product 22b5 (rev. 0x34)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
I have done some digging, but don't the background with usb to really know
where to look. Could someone give me some pointers for what to try?
- Tom
Hi,
Currently there is not so much to try, but you can start poking in
sys/dev/usb/controller/xhci*.[ch] . I have not made any USB-C specific
changes to the XHCI driver in FreeBSD, so yes, it might not work.
There are also some debug knobs: sysctl -a | grep xhci
--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
