たかはしです。
某所から誘導されてまいりましたf(^^;
FreeBSD 6.3-Release(6.3-RELEASE-i386-bootonly.iso)をインストールしようとする
と、panicで起動しません。
WindowsServerや、DebianLinuxなどは起動します。
FreeBSD 7.0-Release、FreeNASの起動CDでは起動しませんでした。
memtest86はエラーなく、48時間パスしました。
PnP情報までは取得できているみたいなのですが、その次の処理でpanicになるようで
す。
RAIDカードは付けていても外しても同じ症状です。
BIOSなのでしょうか・・・？
マシン:NEC Express5800/Firewallserver(N8100-735) Pentium3 1GHz VIA 82C691チッ
プセット
メモリ:768M
RAIDカード:Adaptec ATA-1200A(HPT370 ATA RAIDカード RAID1でセットアップ)
HDD#1:WDC WD2500JB
HDD#2:WDC WD2500BB
以下、boot -v のログです。
SMAP type=01 base=0000000000000000 len=000000000009e000
SMAP type=02 base=000000000009e000 len=0000000000002000
SMAP type=02 base=00000000000e0800 len=000000000001f800
SMAP type=01 base=0000000000100000 len=000000002ff00000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:18:52 UTC 2008
[メールアドレス保護]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fda000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0fda144.
Calibrating clock(s) ... i8254 clock: 1193152 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 997460779 Hz
CPU: Intel Pentium III (997.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 805306368 (768 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000002f239fff, 773935104 bytes (188949 pages)
avail memory = 774598656 (738 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6660
bios32: Entry = 0xfd700 (c00fd700) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd700+0x133
pnpbios: Found PnP BIOS data at 0xc00f66c0
pnpbios: Entry = f0000:9885 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 16 2008 04:16:21)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19)
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: Entry 0.0.INTA has different mask for link 0x55, merging
$PIR: Entry 0.0.INTB has different mask for link 0x56, merging
$PIR: Entry 0.0.INTC has different mask for link 0x56, merging
$PIR: Entry 0.0.INTD has different mask for link 0x57, merging
$PIR: Entry 0.7.INTA has different mask for link 0x55, merging
$PIR: Entry 0.7.INTB has different mask for link 0x56, merging
$PIR: Entry 0.7.INTC has different mask for link 0x56, merging
$PIR: Entry 0.7.INTD has different mask for link 0x57, merging
$PIR: Entry 0.1.INTA has different mask for link 0x56, merging
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x55 255 N 3 3 4 5 6 7 10 11 12 14 15
0x56 255 N 9 3 4 5 6 7 10 11 12 14 15
0x57 255 N 3 3 4 5 6 7 10 11 12 14 15
$PIR: Found matching pin for 0.11.INTA at func 0: 11
$PIR: Found matching pin for 0.9.INTA at func 0: 7
$PIR: Found matching pin for 0.10.INTA at func 0: 7
$PIR: Found matching pin for 0.7.INTD at func 2: 5
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x55 11 Y 3 3 4 5 6 7 10 11 12 14 15
0x56 7 Y 9 3 4 5 6 7 10 11 12 14 15
0x57 5 Y 3 3 4 5 6 7 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 7 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 3 0 9 0 0 0 3 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0691, revid=0xc4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D3 current D0
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 000014a0, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001480, size 5, enabled
$PIR: 0:7 INTD routed to irq 5
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4200000, size 12, enabled
map[14]: type 4, range 32, base 00001400, size 6, enabled
map[18]: type 1, range 32, base f4000000, size 20, enabled
$PIR: 0:9 INTA routed to irq 7
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4201000, size 12, enabled
map[14]: type 4, range 32, base 00001440, size 6, enabled
map[18]: type 1, range 32, base f4100000, size 20, enabled
$PIR: 0:10 INTA routed to irq 7
found-> vendor=0x1103, dev=0x0004, revid=0x03
bus=0, slot=11, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000014c0, size 3, enabled
map[14]: type 4, range 32, base 000014b4, size 2, enabled
map[18]: type 4, range 32, base 000014b8, size 3, enabled
map[1c]: type 4, range 32, base 000014b0, size 2, enabled
map[20]: type 4, range 32, base 00001000, size 8, enabled
$PIR: 0:11 INTA routed to irq 11
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xf4300000-0xf5ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x474d, revid=0x27
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f5000000, size 24, enabled
pcib1: requested memory range 0xf5000000-0xf5ffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base f4300000, size 12, enabled
pcib1: requested memory range 0xf4300000-0xf4300fff: good
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x1480-0x149f irq 5 at device 7.2
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1480
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1400-0x143f mem
0xf4200000-0xf4200fff,0xf4000000-0xf40fffff irq 7 at device 9.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4200000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1033 8084 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:00:4c:4f:ac:72
fxp0: [MPSAFE]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1440-0x147f mem
0xf4201000-0xf4201fff,0xf4100000-0xf41fffff irq 7 at device 10.0 on pci0
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4201000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 1033 8084 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:00:4c:4f:ac:73
fxp1: [MPSAFE]
atapci1: <HighPoint HPT370 UDMA100 controller> port
0x14c0-0x14c7,0x14b4-0x14b7,0x14b8-0x14bf,0x14b0-0x14b3,0x1000-0x10ff irq
11 at device 11.0 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x1000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x14c0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x14b4
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x14b8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x14b0
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
kernel trap 9 with interrupts disabled
Fatal trap 9: general protection fault while in kernel mode
instruction pointer = 0x70:0x4059
stack pointer = 0x28:0xed2
frame pointer = 0x28:0xf16
code segment = base 0xc00f0000, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 0, gran 0
processor eflags = resume, IOPL = 0
current process = 0 (swapper)
trap number = 9
panic: general protection fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--
たかはし [メールアドレス保護]
