?????? ???? wrote this message on Tue, Oct 01, 2013 at 16:01 +0600:
>    Good day!
> 
>    I don't know is it possible to build kernel with CLANG, because now my
>    system builded without clang, so right now I can rebuild world only
>    with gcc (because clang is not present in my system), or maybe I can
>    install clang from ports and rebuild world with clang from ports?

If you use the normal way to build a kernel, then yes, you can build a
kernel w/ clang...  Do:
make kernel-toolchain WITH_CLANG_IS_CC=YES WITH_CLANG=YES <other options>
make buildkernel KERNCONF=<kernfile>

See src/UPDATING for more info/help.

>    30.09.2013, 02:29, "Abhishek Gupta (LIS)" <abgu...@microsoft.com>:
> 
>      Hi,
>      Is it possible for you to compile with the clang compiler instead of
>      gcc?
>      It seems that you are compiling with gcc and that is why the error
>      is showing up:
>      WITHOUT_CLANG=YES
>      WITH_GCC=YES
>      Let me know if that is not acceptable and I will try to address this
>      as soon as possible.
>      Thanks,
>      Abhishek
>      ________________________________________
>      From: [1]owner-freebsd-virtualizat...@freebsd.org
>      <[2]owner-freebsd-virtualizat...@freebsd.org> on behalf of ??????
>      ???? <[3]gosha-n...@yandex.ru>
>      Sent: Sunday, September 29, 2013 11:18 AM
>      To: [4]freebsd-curr...@freebsd.org;
>      [5]freebsd-virtualization@freebsd.org
>      Subject: Hyperv driver related error on make buildkernel on -r255933
>      I have an error when tryin to compile kernel with recent -CURRENT
>      sources
>      There is additional info uname -a, /etc/src.conf, error output and
>      kernel config
>      ======================================== uname -a
>      FreeBSD MYBSD 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Mon Aug 12
>      22:31:24
>      MSK 2013 xlr@MYBSD:/usr/obj/usr/src/sys/MYBSD amd64
>      ======================================== /etc/src.conf
>      WITHOUT_ACCT=YES
>      #WITHOUT_AMD=YES
>      WITHOUT_ASSERT_DEBUG=YES
>      WITHOUT_ATM=YES
>      WITHOUT_AUDIT=YES
>      WITHOUT_AUTHPF=YES
>      WITHOUT_BIND=YES
>      #WITHOUT_BLUETOOTH=YES
>      WITHOUT_BSNMP=YES
>      WITHOUT_CLANG=YES
>      WITHOUT_CTM=YES
>      WITHOUT_FDT=YES
>      WITHOUT_FLOPPY=YES
>      WITHOUT_GDB=YES
>      WITHOUT_HTML=YES
>      WITH_GCC=YES
>      WITH_GNUCXX=YES
>      WITHOUT_ICONV=YES
>      #WITH_LIBICONV_COMPAT=YES
>      WITHOUT_INET6=YES
>      WITHOUT_INFO=YES
>      WITHOUT_IPFILTER=YES
>      WITHOUT_IPX=YES
>      WITHOUT_KERNEL_SYMBOLS=YES
>      WITHOUT_KVM=YES
>      WITHOUT_LPR=YES
>      WITHOUT_MAIL=YES
>      WITHOUT_NCP=YES
>      #WITHOUT_NDIS=YES
>      WITHOUT_OFED=YES
>      WITHOUT_PF=YES
>      WITHOUT_PMC=YES
>      WITHOUT_QUOTAS=YES
>      WITHOUT_RCMDS=YES
>      WITHOUT_RCS=YES
>      WITHOUT_SHAREDOCS=YES
>      #WITHOUT_USB=YES
>      #WITHOUT_WIRELESS=YES
>      WITHOUT_ZFS=YES
>      ======================================== ERROR OUTPUT
>      awk -f /usr/src/sys/conf/kmod_syms.awk hwpmc.ko export_syms | xargs
>      -J%
>      objcopy % hwpmc.ko
>      objcopy --strip-debug hwpmc.ko
>      ===> hyperv (all)
>      ===> hyperv/vmbus (all)
>      cc -O2 -pipe -msse -msse2 -msse3 -mmmx -m3dnow -mtune=core2
>      -march=core2 -fno-strict-aliasing -Wno-error -D_KERNEL -DKLD_MODULE
>      -nostdinc
>      -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/include
>      -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus
>      -I/usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/utilities
>      -DHAVE_KERNEL_OPTION_HEADERS -include
>      /usr/obj/usr/src/sys/MYBSD/opt_global.h -I. -I@ -I@/contrib/altq
>      -finline-limit=8000 --param inline-unit-growth=100 --param
>      large-function-growth=1000 -fno-common -fno-omit-frame-pointer
>      -mno-omit-leaf-frame-pointer -I/usr/obj/usr/src/sys/MYBSD
>      -mcmodel=kernel -mno-red-zone -mno-mmx -mno-sse -msoft-float
>      -fno-asynchronous-unwind-tables -ffreestanding -fstack-protector
>      -std=iso9899:1999 -fstack-protector -Wall -Wredundant-decls
>      -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes
>      -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign
>      -fformat-extensions -Wmissing-include-dirs -fdiagnostics-show-option
>      -c
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann
>      el.
>      c
>      In file included from
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann
>      el.
>      c:40:
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:288: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:396: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:410: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:418: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:426: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:502: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:514: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:528: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_vmbus
>      _pr
>      iv.h:539: warning: declaration does not declare anything
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann
>      el.
>      c: In function 'vmbus_channel_set_event':
>      /usr/src/sys/modules/hyperv/vmbus/../../../dev/hyperv/vmbus/hv_chann
>      el.
>      c:73: error: 'union <anonymous>' has no member named 'pending'
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/src/sys/modules/hyperv/vmbus
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/src/sys/modules/hyperv
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/src/sys/modules
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/obj/usr/src/sys/MYBSD
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/src
>      *** Error code 1
>      Stop.
>      make: stopped in /usr/src
>      =============================================== Kernel config
>      cpu HAMMER
>      ident MYKERN
>      device coretemp
>      #device atapicam
>      #device pccard
>      #device ndis
>      #options NDISAPI
>      #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>      #makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support
>      options SCHED_ULE # ULE scheduler
>      options PREEMPTION # Enable kernel thread preemption
>      options INET # InterNETworking
>      #options INET6 # IPv6 communications protocols
>      options TCP_OFFLOAD # TCP offload
>      #options SCTP # Stream Control Transmission Protocol
>      options FFS # Berkeley Fast Filesystem
>      options SOFTUPDATES # Enable FFS soft updates support
>      #options UFS_ACL # Support for access control lists
>      options UFS_DIRHASH # Improve performance on big directories
>      options UFS_GJOURNAL # Enable gjournal-based UFS journaling
>      options MD_ROOT # MD is a potential root device
>      #options NFSCL # New Network Filesystem Client
>      #options NFSD # New Network Filesystem Server
>      #options NFSLOCKD # Network Lock Manager
>      #options NFS_ROOT # NFS usable as /, requires NFSCL
>      options MSDOSFS # MSDOS Filesystem
>      options CD9660 # ISO 9660 Filesystem
>      options PROCFS # Process filesystem (requires PSEUDOFS)
>      options PSEUDOFS # Pseudo-filesystem framework
>      options GEOM_PART_GPT # GUID Partition Tables.
>      #options GEOM_RAID # Soft RAID functionality.
>      options GEOM_LABEL # Provides labelization
>      options COMPAT_FREEBSD32 # Compatible with i386 binaries
>      options COMPAT_FREEBSD4 # Compatible with FreeBSD4
>      options COMPAT_FREEBSD5 # Compatible with FreeBSD5
>      options COMPAT_FREEBSD6 # Compatible with FreeBSD6
>      options COMPAT_FREEBSD7 # Compatible with FreeBSD7
>      options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
>      #options KTRACE # ktrace(1) support
>      #options STACK # stack(9) support
>      options SYSVSHM # SYSV-style shared memory
>      options SYSVMSG # SYSV-style message queues
>      options SYSVSEM # SYSV-style semaphores
>      options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
>      extensions
>      options PRINTF_BUFR_SIZE=128 # Prevent printf output being
>      interspersed.
>      options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>      #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
>      #options AUDIT # Security event auditing
>      #options CAPABILITY_MODE # Capsicum capability mode
>      #options CAPABILITIES # Capsicum capabilities
>      #options MAC # TrustedBSD MAC Framework
>      #options KDTRACE_FRAME # Ensure frames are compiled in
>      #options KDTRACE_HOOKS # Kernel DTrace hooks
>      #options DDB_CTF # Kernel ELF linker loads CTF data
>      options INCLUDE_CONFIG_FILE # Include this file in kernel
>      # Debugging support. Always need this:
>      #######options KDB # Enable kernel debugger support.
>      # For minimum debugger support (stable branch) use:
>      #######options KDB_TRACE # Print a stack trace for a panic.
>      # For full debugger support use this instead:
>      #######options DDB # Support DDB.
>      #options GDB # Support remote GDB.
>      #options DEADLKRES # Enable the deadlock resolver
>      #options INVARIANTS # Enable calls of extra sanity checking
>      #options INVARIANT_SUPPORT # Extra sanity checks of internal
>      structures, required by INVARIANTS
>      #options WITNESS # Enable checks to detect deadlocks and cycles
>      #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
>      #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
>      # Make an SMP-capable kernel by default
>      options SMP # Symmetric MultiProcessor Kernel
>      # CPU frequency control
>      device cpufreq
>      # Bus support.
>      device acpi
>      device pci
>      # Floppy drives
>      #device fdc
>      # ATA controllers
>      device ahci # AHCI-compatible SATA controllers
>      device ata # Legacy ATA/SATA controllers
>      #options ATA_CAM # Handle legacy controllers with CAM
>      options ATA_STATIC_ID # Static device numbering
>      #device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
>      #device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
>      # SCSI Controllers
>      #device ahc # AHA2940 and onboard AIC7xxx devices
>      #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
>      # output. Adds ~128k to driver.
>      #device ahd # AHA39320/29320 and onboard AIC79xx devices
>      #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
>      # output. Adds ~215k to driver.
>      #device esp # AMD Am53C974 (Tekram DC-390(T))
>      #device hptiop # Highpoint RocketRaid 3xxx series
>      #device isp # Qlogic family
>      #device ispfw # Firmware for QLogic HBAs- normally a module
>      #device mpt # LSI-Logic MPT-Fusion
>      #device mps # LSI-Logic MPT-Fusion 2
>      #device ncr # NCR/Symbios Logic
>      #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
>      #device trm # Tekram DC395U/UW/F DC315U adapters
>      #device adv # Advansys SCSI adapters
>      #device adw # Advansys wide SCSI adapters
>      #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
>      #device bt # Buslogic/Mylex MultiMaster SCSI adapters
>      #device isci # Intel C600 SAS controller
>      # ATA/SCSI peripherals
>      device scbus # SCSI bus (required for ATA/SCSI)
>      #device ch # SCSI media changers
>      device da # Direct Access (disks)
>      #device sa # Sequential Access (tape etc)
>      device cd # CD
>      device pass # Passthrough device (direct ATA/SCSI access)
>      #device ses # Enclosure Services (SES and SAF-TE)
>      device ctl # CAM Target Layer
>      # RAID controllers interfaced to the SCSI subsystem
>      #device amr # AMI MegaRAID
>      #device arcmsr # Areca SATA II RAID
>      #XXX it is not 64-bit clean, -scottl
>      #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
>      #device ciss # Compaq Smart RAID 5*
>      #device dpt # DPT Smartcache III, IV - See NOTES for options
>      #device hptmv # Highpoint RocketRAID 182x
>      #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
>      #device hpt27xx # Highpoint RocketRAID 27xx
>      #device iir # Intel Integrated RAID
>      #device ips # IBM (Adaptec) ServeRAID
>      #device mly # Mylex AcceleRAID/eXtremeRAID
>      #device twa # 3ware 9000 series PATA/SATA RAID
>      #device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller
>      # RAID controllers
>      #device aac # Adaptec FSA RAID
>      #device aacp # SCSI passthrough for aac (requires CAM)
>      #device ida # Compaq Smart RAID
>      #device mfi # LSI MegaRAID SAS
>      #device mlx # Mylex DAC960 family
>      #XXX pointer/int warnings
>      #device pst # Promise Supertrak SX6000
>      #device twe # 3ware ATA RAID
>      # atkbdc0 controls both the keyboard and the PS/2 mouse
>      device atkbdc # AT keyboard controller
>      device atkbd # AT keyboard
>      device psm # PS/2 mouse
>      device kbdmux # keyboard multiplexer
>      device vga # VGA video card driver
>      options VESA # Add support for VESA BIOS Extensions (VBE)
>      device splash # Splash screen and screen saver support
>      # syscons is the default console driver, resembling an SCO console
>      device sc
>      options SC_PIXEL_MODE # add support for the raster text mode
>      #device agp # support several AGP chipsets
>      # PCCARD (PCMCIA) support
>      # PCMCIA and cardbus bridge support
>      #device cbb # cardbus (yenta) bridge
>      #device pccard # PC Card (16-bit) bus
>      #device cardbus # CardBus (32-bit) bus
>      # Serial (COM) ports
>      #device uart # Generic UART driver
>      # Parallel port
>      #device ppc
>      #device ppbus # Parallel port bus (required)
>      #device lpt # Printer
>      #device plip # TCP/IP over parallel
>      #device ppi # Parallel port interface device
>      #device vpo # Requires scbus and da
>      #device puc # Multi I/O cards and multi-channel UARTs
>      # PCI Ethernet NICs.
>      #device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet
>      #device de # DEC/Intel DC21x4x (``Tulip'')
>      #device em # Intel PRO/1000 Gigabit Ethernet Family
>      #device igb # Intel PRO/1000 PCIE Server Gigabit Family
>      #device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
>      #device le # AMD Am7900 LANCE and Am79C9xx PCnet
>      #device ti # Alteon Networks Tigon I/II gigabit Ethernet
>      #device txp # 3Com 3cR990 (``Typhoon'')
>      #device vx # 3Com 3c590, 3c595 (``Vortex'')
>      # PCI Ethernet NICs that use the common MII bus controller code.
>      # NOTE: Be sure to keep the 'device miibus' line in order to use
>      these
>      NICs!
>      device miibus # MII bus support
>      #device ae # Attansic/Atheros L2 FastEthernet
>      #device age # Attansic/Atheros L1 Gigabit Ethernet
>      #device alc # Atheros AR8131/AR8132 Ethernet
>      #device ale # Atheros AR8121/AR8113/AR8114 Ethernet
>      #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
>      #device bfe # Broadcom BCM440x 10/100 Ethernet
>      #device bge # Broadcom BCM570xx Gigabit Ethernet
>      #device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
>      #device dc # DEC/Intel 21143 and various workalikes
>      #device et # Agere ET1310 10/100/Gigabit Ethernet
>      #device fxp # Intel EtherExpress PRO/100B (82557, 82558)
>      #device gem # Sun GEM/Sun ERI/Apple GMAC
>      #device hme # Sun HME (Happy Meal Ethernet)
>      #device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
>      #device lge # Level 1 LXT1001 gigabit Ethernet
>      #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
>      #device nfe # nVidia nForce MCP on-board Ethernet
>      #device nge # NatSemi DP83820 gigabit Ethernet
>      #device nve # nVidia nForce MCP on-board Ethernet Networking
>      #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
>      device re # RealTek 8139C+/8169/8169S/8110S
>      #device rl # RealTek 8129/8139
>      #device sf # Adaptec AIC-6915 (``Starfire'')
>      #device sge # Silicon Integrated Systems SiS190/191
>      #device sis # Silicon Integrated Systems SiS 900/SiS 7016
>      #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
>      #device ste # Sundance ST201 (D-Link DFE-550TX)
>      #device stge # Sundance/Tamarack TC9021 gigabit Ethernet
>      #device tl # Texas Instruments ThunderLAN
>      #device tx # SMC EtherPower II (83c170 ``EPIC'')
>      #device vge # VIA VT612x gigabit Ethernet
>      #device vr # VIA Rhine, Rhine II
>      #device wb # Winbond W89C840F
>      #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>      # ISA Ethernet NICs. pccard NICs included.
>      #device cs # Crystal Semiconductor CS89x0 NIC
>      # 'device ed' requires 'device miibus'
>      #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
>      #device ex # Intel EtherExpress Pro/10 and Pro/10+
>      #device ep # Etherlink III based cards
>      #device fe # Fujitsu MB8696x based cards
>      #device sn # SMC's 9000 series of Ethernet chips
>      #device xe # Xircom pccard Ethernet
>      # Wireless NIC cards
>      device wlan # 802.11 support
>      options IEEE80211_DEBUG # enable debug msgs
>      options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
>      options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
>      device wlan_wep # 802.11 WEP support
>      device wlan_ccmp # 802.11 CCMP support
>      device wlan_tkip # 802.11 TKIP support
>      device wlan_amrr # AMRR transmit rate control algorithm
>      #device an # Aironet 4500/4800 802.11 wireless NICs.
>      device ath # Atheros NICs
>      device ath_pci # Atheros pci/cardbus glue
>      device ath_hal # pci/cardbus chip support
>      options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
>      options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
>      options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later
>      device ath_rate_sample # SampleRate tx rate control for ath
>      #device bwi # Broadcom BCM430x/BCM431x wireless NICs.
>      #device bwn # Broadcom BCM43xx wireless NICs.
>      #device ipw # Intel 2100 wireless NICs.
>      #device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
>      #device iwn # Intel 4965/1000/5000/6000 wireless NICs.
>      #device malo # Marvell Libertas wireless NICs.
>      #device mwl # Marvell 88W8363 802.11n wireless NICs.
>      #device ral # Ralink Technology RT2500 wireless NICs.
>      #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
>      #device wpi # Intel 3945ABG wireless NICs.
>      # Pseudo devices.
>      device loop # Network loopback
>      device random # Entropy device
>      #options PADLOCK_RNG # VIA Padlock RNG
>      #options RDRAND_RNG # Intel Bull Mountain RNG
>      device ether # Ethernet support
>      device vlan # 802.1Q VLAN support
>      device tun # Packet tunnel.
>      device md # Memory "disks"
>      #device gif # IPv6 and IPv4 tunneling
>      #device faith # IPv6-to-IPv4 relaying (translation)
>      device firmware # firmware assist module
>      # The `bpf' device enables the Berkeley Packet Filter.
>      # Be aware of the administrative consequences of enabling this!
>      # Note that 'bpf' is required for DHCP.
>      device bpf # Berkeley packet filter
>      # USB support
>      #options USB_DEBUG # enable debug msgs
>      #device uhci # UHCI PCI->USB interface
>      #device ohci # OHCI PCI->USB interface
>      device ehci # EHCI PCI->USB interface (USB 2.0)
>      device xhci # XHCI PCI->USB interface (USB 3.0)
>      device usb # USB Bus (required)
>      device ukbd # Keyboard
>      device umass # Disks/Mass storage - Requires scbus and da
>      # FireWire support
>      #device firewire # FireWire bus code
>      # sbp(4) works for some systems but causes boot failure on others
>      #device sbp # SCSI over FireWire (Requires scbus and da)
>      #device fwe # Ethernet over FireWire (non-standard!)
>      #device fwip # IP over FireWire (RFC 2734,3146)
>      #device dcons # Dumb console driver
>      #device dcons_crom # Configuration ROM for dcons
>      # Sound support
>      device sound # Generic sound driver (required)
>      #device snd_cmi # CMedia CMI8338/CMI8738
>      #device snd_csa # Crystal Semiconductor CS461x/428x
>      #device snd_emu10kx # Creative SoundBlaster Live! and Audigy
>      #device snd_es137x # Ensoniq AudioPCI ES137x
>      device snd_hda # Intel High Definition Audio
>      device snd_ich # Intel, NVidia and other ICH AC'97 Audio
>      #device snd_via8233 # VIA VT8233x Audio
>      # MMC/SD
>      device mmc # MMC/SD bus
>      device mmcsd # MMC/SD memory card
>      device sdhci # Generic PCI SD Host Controller
>      _______________________________________________
>      [6]freebsd-virtualization@freebsd.org mailing list
>      [7]http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
>      To unsubscribe, send any mail to
>      "[8]freebsd-virtualization-unsubscr...@freebsd.org"
> 
>    --------------------------------------------
>    ? ?????????, ?????? ????.
> 
> References
> 
>    1. mailto:owner-freebsd-virtualizat...@freebsd.org
>    2. mailto:owner-freebsd-virtualizat...@freebsd.org
>    3. mailto:gosha-n...@yandex.ru
>    4. mailto:freebsd-curr...@freebsd.org
>    5. mailto:freebsd-virtualization@freebsd.org
>    6. mailto:freebsd-virtualization@freebsd.org
>    7. http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
>    8. mailto:freebsd-virtualization-unsubscr...@freebsd.org
> _______________________________________________
> freebsd-curr...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
-- 
  John-Mark Gurney                              Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."
_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to