Hi,

On 11/30/14 02:43, Neel Natu wrote:
Can you provide the output of 'pciconf -lvbc pci0:3:0:0' on the FreeBSD host?

This is assuming pci0:3:0:0 is the wlan device being passed through
based on an earlier email.

Yes, it is. Here is the output:
none0@pci0:3:0:0:       class=0x028000 card=0xe042105b chip=0x472714e4 rev=0x01 
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4313 802.11b/g/n Wireless LAN Controller'
    class      = network
    bar   [10] = type Memory, range 64, base 0xb3500000, size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 09[58] = vendor (length 120)
    cap 05[48] = MSI supports 1 message, 64 bit
    cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
                 speed 2.5(2.5) ASPM L1(L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0002[13c] = VC 1 max VC0
    ecap 0003[160] = Serial 1 0000dcffff210c84
    ecap 0004[16c] = Power Budgeting 1

Thanks, Nikos
_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to