Hi John-Mark,

This is w/ a resonably recent current i386 kernel (r275062)

I verified the r274463 i386 snapshot boots fine. That's not quite as recent, but:

...  Any suggestions?

uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
...
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)

The "flags 0x10" text isn't being displayed in the i386 dmesg. This is derived from /boot/device.hints i.e.

...
hint.uart.0.flags=0x10
...

You can see this from bhyveload by issuing a 'show' command to dump all the environment, including what was read in from device.hints by the loader, or "more /boot/device.hints".

It may be possible that this file isn't being populated in your image, or being read in by bhyveload.

later,

Peter.

_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to