Hi Andriy,

On Tue, Jun 2, 2015 at 9:45 AM, Andriy Gapon <a...@freebsd.org> wrote:
> On 02/06/2015 14:14, Andriy Gapon wrote:
>>
>> I am doing a simple experiment.
>>
>> I get FreeBSD image from here:
>> ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/ISO-IMAGES/11.0/FreeBSD-11.0-CURRENT-amd64-r283577-20150526-memstick.img.xz
>>
>> Then I run in bhyve with two additional "disks" created with truncate -s 4g:
>> $ bhyveload -m 1G -d
>> ~/tmp/FreeBSD-11.0-CURRENT-amd64-r283577-20150526-memstick.img test
>> $ bhyve -A -HP -s 0:0,hostbridge -s 1,lpc -s 2:0,virtio-net,tap0 -s
>> 3:0,virtio-blk,/home/avg/tmp/FreeBSD-11.0-CURRENT-amd64-r283577-20150526-memstick.img
>> -s 3:1,virtio-blk,/tmp/l2arc-test/hdd1,sectorsize=512/4096 -s
>> 3:2,virtio-blk,/tmp/l2arc-test/hdd2,sectorsize=512/4096 -l com1,stdio -l
>> com2,/dev/nmdm0A -c 2 -m 1g test
>>
>> Note sectorsize=512/4096 options.  Not sure if it's them that cause the 
>> trouble.
>>
>> Then, in the VM:
>> $ zpool create l2arc-test mirror /dev/vtbd1 /dev/vtbd2
>> $ zfs create -p l2arc-test/ROOT/initial
>> $ tar -c --one-file-system -f - / | tar -x -C /l2arc-test/ROOT/initial -f -
>>
>> Afterwards, zpool status -v reports no problem.
>> But then I run zpool scrub and get the following in the end:
>> $ zpool status -v
>>   pool: l2arc-test
>>  state: ONLINE
>> status: One or more devices has experienced an error resulting in data
>>         corruption.  Applications may be affected.
>> action: Restore the file in question if possible.  Otherwise restore the
>>         entire pool from backup.
>>    see: http://illumos.org/msg/ZFS-8000-8A
>>   scan: scrub repaired 356K in 0h0m with 9 errors on Tue Jun  2 13:58:17 2015
>> config:
>>
>>         NAME        STATE     READ WRITE CKSUM
>>         l2arc-test  ONLINE       0     0     9
>>           mirror-0  ONLINE       0     0    18
>>             vtbd1   ONLINE       0     0    25
>>             vtbd2   ONLINE       0     0    23
>>
>> errors: Permanent errors have been detected in the following files:
>>
>>         /l2arc-test/ROOT/initial/usr/bin/svnlitesync
>>         /l2arc-test/ROOT/initial/usr/freebsd-dist/kernel.txz
>>         /l2arc-test/ROOT/initial/usr/freebsd-dist/src.txz
>>
>> /l2arc-test/ROOT/initial/usr/lib/clang/3.6.1/lib/freebsd/libclang_rt.asan-x86_64.a
>>
>>
>> The same issue is reproducible with ahci-hd.
>>
>> My host system is a recent amd64 CURRENT as well.  The hardware platform is 
>> AMD.
>>
>
> I used the following monstrous command line to reproduce the test in qemu:
> $ qemu-system-x86_64 -smp 2 -m 1024 -drive
> file=/tmp/livecd2/R2.img,format=raw,if=none,id=bootd -device
> virtio-blk-pci,drive=bootd -drive
> file=/tmp/l2arc-test/hdd1,if=none,id=hdd1,format=raw -device
> virtio-blk-pci,drive=hdd1,logical_block_size=4096 -drive
> file=/tmp/l2arc-test/hdd2,id=hdd2,if=none,format=raw -device
> virtio-blk-pci,drive=hdd2,logical_block_size=4096 -drive
> file=/tmp/l2arc-test/ssd,id=ssd,if=none,format=raw -device
> virtio-blk-pci,drive=ssd,logical_block_size=4096 ...
>
> And several other variations of logical_block_size and physical_block_size.
> The tests a re very slow, but there are no checksum errors.
>
> So, I suspect guest memory corruption caused by bhyve.  Perhaps the problem is
> indeed specific to AMD-V.
>

Perhaps, but I wasn't able to repro this. I tried your recipe to repro
on two systems running -current at r283917.

- Intel Sandybridge server: Xeon E52650  with 8 cores/16 threads and 64GB memory
  - hdd1/hdd2 on UFS
  - hdd1/hdd2 on ZFS

- AMD Opteron server: Opteron 6230 with 8 cores and 16GB memory
  - hdd1/hdd2 on UFS

Can you provide some more details about your setup? I can then try to
repro on a system similar to your setup.

- uname -a
- sysctl hw.model
- sysctl hw.ncpu
- sysctl hw.physmem
- sysctl hw.vmm
- host filesystem underlying hdd1 and hdd2

best
Neel

> --
> Andriy Gapon
> _______________________________________________
> freebsd-virtualization@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> To unsubscribe, send any mail to 
> "freebsd-virtualization-unsubscr...@freebsd.org"
_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to