On Fri, Aug 7, 2015 at 2:59 AM, Outback Dingo <outbackdi...@gmail.com> wrote: > > > On Fri, Aug 7, 2015 at 3:40 AM, C. L. Martinez <carlopm...@gmail.com> wrote: >> >> Hi all, >> >> Is it needed to install some components from ports in a FreeBSD 10.2 >> RC2 guest under Windows 10 Hyper-V?? >> >> I am doing some tests and at this stage I have problems with my pf >> rules (they are working without problems in another FreeBSD 10.2 RC2 >> guest under KVM). >> > > might want to explain the issue a bit further, like what kind of problem.. > im running 10.2 under hyper-v and not seeing any issues >
Sure, no problems. I am sure that my pf rules are ok, because I use them in several FreeBSD 10.x installs. Testing with a simple rule set like this: scrub log on $ExtIf all reassemble tcp fragment reassemble nat on $ExtIf from $IntIf:network to any -> ($ExtIf) pass all ICMP proto works without problems. But UDP and TCP connections, fails. I can see how traffic flows in this FreeBSD vm acting as a firewall (using tcpdump), but connections aren't returned. I have tried to disable tso, tx and rx checksum, etc without luck. This FreeBSD vm is created as Gen1 hyper-v guest. I don't know if it can Works as Gen2. But configuring another vm inside this Hyper-V using Debian, iptables works without problems for all protocols. Any idea? _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"