I thought I would raise the above on the m...@openbsd.org mail list as I
was concluding my testing for the upcoming 6.1 release.  Here is my initial
email:

http://marc.info/?l=openbsd-misc&m=149136052120277&w=2

Based on the responses:

http://marc.info/?l=openbsd-misc&m=149136160420488&w=2

and

http://marc.info/?l=openbsd-misc&m=149136173520510&w=2

it appears that bhyve is publishing a CPU feature that actually isn't there.

FYI, 6.1-release and 6.1-snapshots will not boot at this stage.  I have my
new production kit arriving so I can test on different hardware to
determine if this is a CPU rev. issue but thought I'd put it here to get
the thought processes working on it.  I am running 11.0-release p8

Thanks,

Jason.

dmesg
-----------------

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 06:12:04 UTC 2017
    r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM
3.8.0)
VT(efifb): resolution 1440x900
CPU: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (3491.99-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended
Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8160088064 (7782 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-WKS>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101d970, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-WKS> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
cpu4: <ACPI CPU> numa-domain 0 on acpi0
cpu5: <ACPI CPU> numa-domain 0 on acpi0
cpu6: <ACPI CPU> numa-domain 0 on acpi0
cpu7: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
acpi_button0: <Power Button> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 47 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 2.0 on pci3
pci4: <PCI bus> on pcib4
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem
0xf6000000-0xf7ffffff at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 00:10:18:bf:c4:e8
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs
(RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem
0xf8000000-0xf9ffffff at device 0.1 on pci4
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: 00:10:18:bf:c4:ea
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs
(RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib5: <PCI-PCI bridge> at device 4.0 on pci3
pci5: <PCI bus> on pcib5
bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem
0xf2000000-0xf3ffffff at device 0.0 on pci5
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: 00:10:18:bf:c4:ec
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs
(RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem
0xf4000000-0xf5ffffff at device 0.1 on pci5
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: 00:10:18:bf:c4:ee
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs
(RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 2.0 on pci1
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem
0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at
device 0.0 on pci6
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfb000000-0xfb003fff irq 36 at
device 0.1 on pci6
pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.0 on pci1
pci7: <ACPI PCI bus> on pcib7
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg (RAID) AHCI SATA controller> port
0x20a0-0x20a7,0x20b4-0x20b7,0x2098-0x209f,0x20b0-0x20b3,0x2040-0x205f mem
0xfb13c000-0xfb13c7ff irq 16 at device 17.4 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb120000-0xfb12ffff irq
19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms, UART> at device 22.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2020-0x203f mem
0xfb100000-0xfb11ffff,0xfb13a000-0xfb13afff irq 20 at device 25.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 64:51:06:4a:4b:df
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb139000-0xfb1393ff irq
18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb130000-0xfb133fff irq 22 at
device 27.0 on pci1
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci1
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 28.3 on pci1
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1
pci12: <ACPI PCI bus> on pcib12
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb138000-0xfb1383ff irq
18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
atapci0: <Intel Wellsburg SATA600 controller> port
0x2088-0x208f,0x20ac-0x20af,0x2080-0x2087,0x20a8-0x20ab,0x2070-0x207f,0x2060-0x206f
irq 16 at device 31.2 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xd7800-0xd87ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6
est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC221 (Analog)> at nid 23 and 24,26,27 on hdaa1
pcm3: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ugen0.2: <CHICONY> at usbus0
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on
usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on
usbus2
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10EZEX-60M2NA0 03.01A03> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WCC3F5VFLZY6
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST1000DM003-1ER162 CC46> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z4Y86N2K
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
uhub3: 6 ports with 6 removable, self powered
ada1: quirks=0x1<4K>
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <INTEL SSDSC2CW060A3 400i> ACS-2 ATA SATA 3.x device
ada2: Serial Number CVCV2080008A060AGN
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 57241MB (117231408 512 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1745995300 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x0451> at usbus0
uhub5: <vendor 0x0451 product 0x8142, class 9/0, rev 2.10/1.00, addr 2> on
usbus0
uhub5: MTT enabled
GEOM_MIRROR: Device mirror/swap launched (2/2).
Root mount waiting for: usbus0
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <vendor 0x0451> at usbus0
uhub6: <vendor 0x0451 product 0x8140, class 9/0, rev 3.00/1.00, addr 3> on
usbus0
uhub6: 4 ports with 4 removable, self powered
bce0: link state changed to DOWN
bce3: link state changed to DOWN
bce0: Gigabit link up!
bce0: link state changed to UP
bce0: Gigabit link up!
bce0: Gigabit link up!
tap50: Ethernet address: 00:bd:72:a2:f7:32
bridge0: Ethernet address: 02:a3:84:b8:89:00
bce0: promiscuous mode enabled
bridge0: link state changed to UP
tap50: promiscuous mode enabled
tap20: Ethernet address: 00:bd:ca:a2:f7:14
bridge2: Ethernet address: 02:a3:84:b8:89:02
bce3: promiscuous mode enabled
bridge2: link state changed to DOWN
tap20: promiscuous mode enabled
tap50: link state changed to UP
tap20: link state changed to UP
bridge2: link state changed to UP
bce3: Gigabit link up!
bce3: link state changed to UP
_______________________________________________
freebsd-virtualization@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to