Unfortunately, i dont see a stderr log. I am using vm-bhyve for managing the vm's.
# pciconf -l -BbcV pci0:129:0:0 ppt3@pci0:129:0:0: class=0x0c0330 card=0x11001b73 chip=0x11001b73 rev=0x10 hdr=0x00 bar  = type Memory, range 64, base 0xfb200000, size 65536, enabled bar  = type Memory, range 64, base 0xfb211000, size 4096, enabled bar  = type Memory, range 64, base 0xfb210000, size 4096, enabled cap 01 = powerspec 3 supports D0 D1 D3 current D0 cap 05 = MSI supports 8 messages, 64 bit cap 10 = PCI-Express 2 endpoint max data 256(512) NS link x1(x1) speed 5.0(5.0) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 8 messages Table in map 0x18[0x0], PBA in map 0x20[0x0] ecap 0001 = AER 1 0 fatal 0 non-fatal 0 corrected I havent yet managed to get a USB card to work stably with FreeBSD 11.1 . This is my third card. They work fine if i boot into Ubuntu linux.  https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221491 On 08/16/2017 09:38 PM, Peter Grehan wrote: > Hi, > >> I have a PCIe USB card which is exported to the bhyve vm using >> passthrough. I have tried to use the card in Ubuntu, Debian 8 and Centos >> 7. Each time the OS has given a segmentation fault on bootup and killed >> the bhyve session. This is what i get in the bhyve-log: > > Is stderr logged anywhere ? That may have additional error output > from the bhyve passthru code. > >> The USB card works fine on the host and is detected by the xhci driver. >> The card is "Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card >> - Interface USB 3.0 4-Port" >> (https://www.amazon.com/gp/product/B00B6ZCNGM) >> >> ppt3@pci0:129:0:0: class=0x0c0330 card=0x11001b73 chip=0x11001b73 >> rev=0x10 hdr=0x00 >> vendor = 'Fresco Logic' >> device = 'FL1100 USB 3.0 Host Controller' >> class = serial bus >> subclass = USB > > Would you be able to post the output of > > pciconf -l -BbcV pci0:129:0:0 > > later, > > Peter. _______________________________________________ firstname.lastname@example.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to "freebsd-virtualization-unsubscr...@freebsd.org"