Hi, .. I'm trying to pci passhthrough a usb controller to a bhyve windows 7 virtualization. When I start the virtual machine it freezes the entire system. See console.log To be clear the system runs without any problems without the pci passthrough.
kernel configuration include GENERIC ident OFL options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options CONSPEED=115200 * note: removed xhci driver from GENERIC I've recompiled the kernel without the xhci driver. I've tested both usb controllers. Both "Sunrise Point-H USB 3.0 xHCI Controller" and "uPD720202 USB 3.0 Host Controller", both showed the same error on the console screen. # uname FreeBSD 11.1-STABLE #1 r331092M # custom kernel include GENERIC ident OFL options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options CONSPEED=115200 * note commented "device xhci" in generic # svn info Path: . Working Copy Root Path: /usr/src URL: https://svn0.eu.freebsd.org/base/stable/11 Relative URL: ^/stable/11 Repository Root: https://svn0.eu.freebsd.org/base Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 331092 Node Kind: directory Schedule: normal Last Changed Author: eadler Last Changed Rev: 331092 Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) # vm passthru DEVICE BHYVE ID READY DESCRIPTION hostb0 0/0/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers pcib1 0/1/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) vgapci0 0/2/0 No HD Graphics 530 ppt0 0/20/0 Yes Sunrise Point-H USB 3.0 xHCI Controller none0 0/20/2 No Sunrise Point-H Thermal subsystem none1 0/22/0 No Sunrise Point-H CSME HECI ahci0 0/23/0 No Sunrise Point-H SATA controller [AHCI mode] pcib2 0/28/0 No Sunrise Point-H PCI Express Root Port pcib4 0/28/6 No Sunrise Point-H PCI Express Root Port isab0 0/31/0 No Sunrise Point-H LPC Controller none2 0/31/2 No Sunrise Point-H PMC hdac0 0/31/3 No Sunrise Point-H HD Audio none3 0/31/4 No Sunrise Point-H SMBus em0 0/31/6 No Ethernet Connection (2) I219-V pcib3 2/0/0 No XIO2001 PCI Express-to-PCI Bridge xl0 3/0/0 No 3c905B 100BaseTX [Cyclone] ppt1 4/0/0 Yes uPD720202 USB 3.0 Host Controller ppt1@pci0:4:0:0: class=0x0c0330 card=0x00151912 chip=0x00151912 rev=0x02 hdr=0x00 vendor = 'Renesas Technology Corp.'/mailman device = 'uPD720202 USB 3.0 Host Controller' class = serial bus subclass = USB ppt0@pci0:0:20:0: class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 rev=0x31 hdr=0x00 vendor = 'Intel Corporation' device = 'Sunrise Point-H USB 3.0 xHCI Controller' class = serial bus subclass = USB # grep -i pptdevfs loader.conf pptdevs="0/20/0 4/0/0" # vm configure passthru0="0/20/0" # vm configure passthru0="4/0/0" Any suggestions on what I'm doing wrong? * Sorry kinda new to this mailing list thing Op 23-03-18 om 18:25 schreef Julian Elischer: > On 23/3/18 11:40 pm, Wouter Snels wrote: > > > new wrapping is no better > It looks like the device you are passing though is not removed from > freebsd first. > but it's hard to tell. > >> |Hi, .. I'm trying to pci passhthrough a usb controller to a bhyve >> windows 7 virtualization. When I start the virtual machine it freezes >> the entire system and this shows up on the console. To be clear the >> system runs without any problems without the pci passthrough. | >> ||(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 e0 ff 40 40 29 00 >> 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was invalid >> (ada0:ahcich0:0:0:0): Error 22, Unretryable error >> (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 >> 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was invalid >> (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ada0 at ahcich0 bus >> 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1SB10A CC43> s/n ZA4292G6 >> detached (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 >> 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: >> Poll timeout on slot 28 port 0 ahcich0: is 20000000 cs 10000000 ss >> 00000000 rs 10000000 tfd 1d0 serr 00000800 cmd 00005c17 >> (aprobe0:ahcich0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 >> 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 >> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: Poll >> timeout on slot 30 port 0 ahcich0: is 20000000 cs 40000000 ss 00000000 >> rs 40000000 tfd 1d0 serr 00000800 cmd 00005e17 (aprobe0:ahcich0:0:0:0): >> SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 >> (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 >> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error >> (ada0:ahcich0:0:0:0): Periph destroyed em0: Watchdog timeout Queue[0]-- >> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >> tdh = 428, hw tdt = 471 em0: Tx Queue Status = -2147483648 em0: TX >> descriptors avail = 981 em0: Tx Descriptors avail failure = 0 em0: RX >> Queue 0 ------ em0: hw rdh = 912, hw rdt = 908 em0: RX discarded packets >> = 0 em0: RX Next to Check = 909 em0: RX Next to Refresh = 908 xl0: >> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 58 >> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 966 em0: >> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >> hw rdt = 1023 em0: RX discarded packets = 0 em0: RX Next to Check = 0 >> em0: RX Next to Refresh = 1023 em0: Watchdog timeout Queue[0]-- >> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >> tdh = 0, hw tdt = 58 em0: Tx Queue Status = -2147483648 em0: TX >> descriptors avail = 966 em0: Tx Descriptors avail failure = 0 em0: RX >> Queue 0 ------ em0: hw rdh = 0, hw rdt = 1023 em0: RX discarded packets >> = 0 em0: RX Next to Check = 0 em0: RX Next to Refresh = 1023 xl0: >> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 54 >> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 970 em0: >> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >> hw rdt = 1023 em0: RX discarded packets = 0include GENERIC ident OFL >> options IPFIREWALL|||||| >> >> |Hi, .. I'm trying to pci passhthrough a usb controller to a bhyve >> windows 7 virtualization. When I start the virtual machine it freezes >> the entire system and this shows up on the console. To be clear the >> system runs without any problems without the pci passthrough. | >> ||(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 e0 ff 40 40 29 00 >> 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was invalid >> (ada0:ahcich0:0:0:0): Error 22, Unretryable error >> (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 >> 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was invalid >> (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ada0 at ahcich0 bus >> 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1SB10A CC43> s/n ZA4292G6 >> detached (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 >> 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: >> Poll timeout on slot 28 port 0 ahcich0: is 20000000 cs 10000000 ss >> 00000000 rs 10000000 tfd 1d0 serr 00000800 cmd 00005c17 >> (aprobe0:ahcich0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 >> 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 >> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: Poll >> timeout on slot 30 port 0 ahcich0: is 20000000 cs 40000000 ss 00000000 >> rs 40000000 tfd 1d0 serr 00000800 cmd 00005e17 (aprobe0:ahcich0:0:0:0): >> SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 >> (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 >> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error >> (ada0:ahcich0:0:0:0): Periph destroyed em0: Watchdog timeout Queue[0]-- >> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >> tdh = 428, hw tdt = 471 em0: Tx Queue Status = -2147483648 em0: TX >> descriptors avail = 981 em0: Tx Descriptors avail failure = 0 em0: RX >> Queue 0 ------ em0: hw rdh = 912, hw rdt = 908 em0: RX discarded packets >> = 0 em0: RX Next to Check = 909 em0: RX Next to Refresh = 908 xl0: >> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 58 >> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 966 em0: >> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >> hw rdt = 1023 em0: RX discarded packets = 0 em0: RX Next to Check = 0 >> em0: RX Next to Refresh = 1023 em0: Watchdog timeout Queue[0]-- >> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >> tdh = 0, hw tdt = 58 em0: Tx Queue Status = -2147483648 em0: TX >> descriptors avail = 966 em0: Tx Descriptors avail failure = 0 em0: RX >> Queue 0 ------ em0: hw rdh = 0, hw rdt = 1023 em0: RX discarded packets >> = 0 em0: RX Next to Check = 0 em0: RX Next to Refresh = 1023 xl0: >> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 54 >> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 970 em0: >> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >> hw rdt = 1023 em0: RX discarded packets = 0include GENERIC ident OFL >> options IPFIREWALL options IPFIREWALL_VERBOSE options >> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >> CONSPEED=115200 em0: RX Next to Check = 0 em0: RX Next to Refresh = >> 1023 |||| >> |||I've recompiled the kernel without the xhci driver. I've tested both >> usb controllers. Both "|||||Sunrise Point-H USB 3.0 xHCI >> Controller|"||||| and "|||uPD720202 USB 3.0 Host Controller|", both >> showed the same error on the console screen.| # uname FreeBSD >> 11.1-STABLE #1 r331092M # custom kernel include GENERIC ident OFL >> options IPFIREWALL options IPFIREWALL_VERBOSE options >> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >> CONSPEED=115200 * note commented "device xhci" in generic # svn info >> |||Path: . Working Copy Root Path: /usr/src URL: >> https://svn0.eu.freebsd.org/base/stable/11 Relative URL: ^/stable/11 >> Repository Root: https://svn0.eu.freebsd.org/base Repository UUID: >> ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 331092 Node Kind: >> directory Schedule: normal Last Changed Author: eadler Last Changed Rev: >> 331092 Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) >> |# vm passthru DEVICE BHYVE ID READY DESCRIPTION hostb0 0/0/0 No Xeon >> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers >> pcib1 0/1/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe >> Controller (x16) vgapci0 0/2/0 No HD Graphics 530 |||ppt0| 0/20/0 Yes >> Sunrise Point-H USB 3.0 xHCI Controller none0 0/20/2 >> No Sunrise Point-H Thermal subsystem none1 0/22/0 No Sunrise Point-H >> CSME HECI ahci0 0/23/0 No Sunrise Point-H SATA controller [AHCI mode] >> pcib2 0/28/0 No Sunrise Point-H PCI Express Root Port pcib4 0/28/6 No >> Sunrise Point-H PCI Express Root Port isab0 0/31/0 No Sunrise Point-H >> LPC Controller none2 0/31/2 No Sunrise Point-H PMC hdac0 0/31/3 No >> Sunrise Point-H HD Audio none3 0/31/4 No Sunrise Point-H SMBus em0 >> 0/31/6 No Ethernet Connection (2) I219-V pcib3 2/0/0 No XIO2001 PCI >> Express-to-PCI Bridge xl0 3/0/0 No 3c905B 100BaseTX [Cyclone] ppt1 4/0/0 >> Yes uPD720202 USB 3.0 Host Controller ||ppt1@pci0:4:0:0: >> class=0x0c0330 card=0x00151912 chip=0x00151912 rev=0x02 >> hdr=0x00 vendor = 'Renesas Technology Corp.' device = 'uPD720202 USB 3.0 >> Host Controller' class = serial bus subclass = USB >> |||ppt|0@pci0:0:20:0: class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 >> rev=0x31 hdr=0x00 vendor = 'Intel Corporation' device = 'Sunrise Point-H >> USB 3.0 xHCI Controller' class = serial bus subclass = USB # grep -i >> pptdevfs loader.conf ||pptdevs="0/20/0 4/0/0" # vm configure >> ||passthru0="0/20/0"| >> >> |# vm configure ||passthru0="4/0/0"| >> ||Any suggestions on what I'm doing wrong?|| >> Regards, Ofloo >> |||||| >> >> ||options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO_ACCEPT >> options >> DUMMYNET options IPDIVERT options CONSPEED=115200 em0: RX Next to Check >> = 0 em0: RX Next to Refresh = 1023 |||| >> |||I've recompiled the kernel without the xhci driver. I've tested both >> usb controllers. Both "|||||Sunrise Point-H USB 3.0 xHCI >> Controller|"||||| and "|||uPD720202 USB 3.0 Host Controller|", both >> showed the same error on the console screen.| # uname FreeBSD >> 11.1-STABLE #1 r331092M # custom kernel include GENERIC ident OFL >> options IPFIREWALL options IPFIREWALL_VERBOSE options >> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >> CONSPEED=115200 * note commented "device xhci" in generic # svn info >> |||Path: . Working Copy Root Path: /usr/src URL: >> https://svn0.eu.freebsd.org/base/stable/11 Relative URL: ^/stable/11 >> Repository Root: https://svn0.eu.freebsd.org/base Repository UUID: >> ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 331092 Node Kind: >> directory Schedule: normal Last Changed Author: eadler Last Changed Rev: >> 331092 Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) >> |# vm passthru DEVICE BHYVE ID READY DESCRIPTION hostb0 0/0/0 No Xeon >> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers >> pcib1 0/1/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe >> Controller (x16) vgapci0 0/2/0 No HD Graphics 530 |||ppt0| 0/20/0 Yes >> Sunrise Point-H USB 3.0 xHCI Controller none0 0/20/2 >> No Sunrise Point-H Thermal subsystem none1 0/22/0 No Sunrise Point-H >> CSME HECI ahci0 0/23/0 No Sunrise Point-H SATA controller [AHCI mode] >> pcib2 0/28/0 No Sunrise Point-H PCI Express Root Port pcib4 0/28/6 No >> Sunrise Point-H PCI Express Root Port isab0 0/31/0 No Sunrise Point-H >> LPC Controller none2 0/31/2 No Sunrise Point-H PMC hdac0 0/31/3 No >> Sunrise Point-H HD Audio none3 0/31/4 No Sunrise Point-H SMBus em0 >> 0/31/6 No Ethernet Connection (2) I219-V pcib3 2/0/0 No XIO2001 PCI >> Express-to-PCI Bridge xl0 3/0/0 No 3c905B 100BaseTX [Cyclone] ppt1 4/0/0 >> Yes uPD720202 USB 3.0 Host Controller ||ppt1@pci0:4:0:0: >> class=0x0c0330 card=0x00151912 chip=0x00151912 rev=0x02 >> hdr=0x00 vendor = 'Renesas Technology Corp.' device = 'uPD720202 USB 3.0 >> Host Controller' class = serial bus subclass = USB >> |||ppt|0@pci0:0:20:0: class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 >> rev=0x31 hdr=0x00 vendor = 'Intel Corporation' device = 'Sunrise Point-H >> USB 3.0 xHCI Controller' class = serial bus subclass = USB # grep -i >> pptdevfs loader.conf ||pptdevs="0/20/0 4/0/0" # vm configure >> ||passthru0="0/20/0"| >> >> |# vm configure ||passthru0="4/0/0"| >> ||Any suggestions on what I'm doing wrong?|| >> >> edit: previous wrapping was all wrong. >> Regards, Ofloo >> |||||| >> >>
signature.asc
Description: OpenPGP digital signature
