Rodney W. Grimes wrote: > > > > [dd] > > > > > > > > > > root@mfsbsd:~ # find /mnt/ -name grubx64.efi > > > > /mnt/EFI/centos/grubx64.efi > > > > > > > > Who is to blame, bhyve or FreePBX's installer? > > > > > > > > How can I tell bhyve's UEFI loader to look for grubx64.efi in a > > > > different place? Or look for a different loader? > > > > > > > > Who says that the image to load should be "\EFI\BOOT\grubx64.efi" and > > > > not "\EFI\BOOT\BOOTX64.EFI" for example? > > > > > > I can not quickly answer that, but lets try the short quick fix > > > and simply copy this file to the right place and see if that > > > gets you up and running. > > > > Yes, copying grubx64.efi to "\EFI\BOOT\" does get the guest up and > > running (I used mfsbsd from a different VM to manipulate the EFI > > partition). > > You can usually use the host by doing mdconfig -f <path+to+diskimage>
Unfortunately mdconfig does not work with zvols: root@vas:~ # mdconfig -a -f /dev/zvol/d02/vm/freepbx/disk0 mdconfig: /dev/zvol/d02/vm/freepbx/disk0 is not a regular file > > Moreover, I waited (for a long time!) for the EFI interactive shell > > prompt and with a few commands: > > Yes, the timeout is very long, and I do not know that we > document anyplace that if you wait long enough at a failed > boot you do get a EFI shell prompt eventually. Can I press some key to escape to the EFI shell? > > Shell> fs0 > > FS0:\> cd \EFI\centos > > FS0:\EFI\centos\> grubx64.efi > > > > I also managed to boot the guest OS all right. > > > > But naturally, the latter fix worked till next reboot only, I don't know > > how to save the new EFI setup in the guest's configuration. > > My recommedation at this time would be to simply copy grubx64.efi > to the right place and leave it there so that it just boots without > any other change. That's what I have done for now. > > > > The hardware UFI BIOSes I've seen so far (not many, I must admit) > > permitted me to save which efi binary I would prefer to boot next time. > > That is done with an efivar, as it stands right now bhyve efi has > no persistant variable storage, a feature that needs to be implemented. I see. [dd] > > > I can guess that it looks for a FAT16 partition in the GPT with the type > > "efi" but the rest is a mystery for me. Why is it trying to find > > "grubx64.efi" and not the default "boot64.efi" (which is present), for > > example? > > I suspect that what ever guest you installed installed something > else someplace, either within the eft partition, or possibly in > the MBR? Do you mean to say, the guest installing something else someplace can influence the boot sequence of bhyve efi? -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN 2:5005/49@fidonet http://vas.tomsk.ru/
signature.asc
Description: PGP signature