On 4/5/21 8:35 pm, infoomatic wrote:
fyi: I gave 13.0-RC4 a try, but this did not work out neither...
On 28.03.21 21:56, infoomatic wrote:
Hi all,
I own a pcengines apu2e4 where bhyve passthru is working in general.
Passing through the i210AT NICs works fine. However, I bought a Compex
WLE200NX a/b/g/n miniPCI card which is based on the Qualcomm Atheros
AR9280 chip I also want to pass through.
On the host I am running 12.2-RELEASE-p5.
my loader.conf:
hw.vmm.amdvi.enable=1
vmm_load="YES"
pptdevs="1/0/0 3/0/0 4/0/0"
hw.vmm.iommu.enable=1
pciconf -lv gives (relevant info; with igb0 used on the host):
ppt0@pci0:1:0:0: class=0x028000 card=0x3099168c chip=0x002a168c
rev=0x01 hdr=0x00
vendor = 'Qualcomm Atheros'
device = 'AR928X Wireless Network Adapter (PCI-Express)'
class = network
igb0@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x157b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
ppt1@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x157b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
ppt2@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x157b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
in my vm-bhyve config I have
passthru0="1/0/0"
passthru1="4/0/0"
which works nicely with the i210 adapter, but not with the wifi adapter.
The wifi adapter also works when not passing through and using it via
the host. In the VM (tried both the 12.2-RELEASE and 13.0-RC3), I have
tried to load/unload various modules (or e.g. tried
dev.ath.0.hal.force_full_reset=1), I do not get any connections, wifi
scans/lists do not work. Other configurations result in "ath0: Device
timeout" or in "wlan0: CTRL-EVENT-SCAN-FAILED ret=-1 retry=1".
Any ideas how to resolve that?
Regards,
Robert
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
"[email protected]"
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
"[email protected]"
Could you cherry-pick the follow commits and see if they works?
ede14736fd6d74db0374f4a233491ad5dc0e9b1d
74ada297e8978b8efda3dffdd1bb24aee7c5faa4
cf76495e0a30043503ef126f0a485e314730a221
03efa462b2ab3ae8166598363e9e83d4e5cf0398
Ka Ho
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
"[email protected]"
