.. and here I am, hoping you're user #1 (with me being user #0) of this HAL. :)



Adrian


On 14 March 2013 19:20, Adrian Chadd <adrian.ch...@gmail.com> wrote:
> Oh!
>
> http://wikidevi.com/wiki/TP-LINK_TL-WDN4800
>
> Silly me, I was reading the wrong number on my phone.
>
> Yes, 0x0030 is Osprey (AR9380.)
>
> kldload if_ath_pci too. :-)
>
>
>
> Adrian
>
> On 14 March 2013 19:18, Joshua Isom <jri...@gmail.com> wrote:
>> Not a laptop, but here's the vendor's website.
>> http://www.tp-link.com/en/products/details/?model=TL-WDN4800
>>
>>
>> On 3/14/2013 9:02 PM, Adrian Chadd wrote:
>>>
>>> 0x3112? What nic is that?
>>>
>>> I'll go and take a quick look at the reference driver. Can you google
>>> your laptop model and see what you can find?
>>>
>>>
>>> Adrian
>>>
>>>
>>> Sent from my Palm Pre on AT&T
>>>
>>> ------------------------------------------------------------------------
>>>
>>> On Mar 14, 2013 6:31 PM, Joshua Isom <jri...@gmail.com> wrote:
>>>
>>> On 3/13/2013 7:31 PM, Adrian Chadd wrote:
>>>>
>>>> On 9 March 2013 10:54, Adrian Chadd <adr...@freebsd.org> wrote:
>>>>
>>>>> What's tested:
>>>>>
>>>>> * legacy, 1x1 and 2x2 HT20/HT40, STA mode
>>>>> * AR9380 (1x1, 2x2 - 2/5ghz)
>>>>> * AR9485 (1x1, 2ghz only)
>>>>
>>>>
>>>> I can now add two more NICs to this list:
>>>>
>>>> * AR9390 (HB116)
>>>> * AR9462 (WB225)
>>>>
>>>> Thanks,
>>>>
>>>>
>>>> Adrian
>>>> _______________________________________________
>>>> freebsd-wireless@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>> To unsubscribe, send any mail to
>>>> "freebsd-wireless-unsubscr...@freebsd.org"
>>>>
>>>
>>>
>>> I've got it all compiled and booted, but the driver's not finding the
>>> card. Any ideas?
>>>
>>>> [jri:~] root# uname -a
>>>> FreeBSD jri.homeunix.com 10.0-CURRENT FreeBSD 10.0-CURRENT #5 r248281M:
>>>> Thu Mar 14 18:55:48 CDT 2013
>>>> r...@jri.homeunix.com:/usr/obj/root/ATH/head/sys/ATH  amd64
>>>> [jri:~] root# pciconf -lv # Truncated
>>>> none3@pci0:2:0:0:       class=0x028000 card=0x3112168c chip=0x0030168c
>>>> rev=0x01 hdr=0x00
>>>>     vendor     = 'Atheros Communications Inc.'
>>>>     device     = 'AR9300 Wireless LAN adaptor'
>>>>     class      = network
>>>> [jri:~] root# diff ATH/head/sys/amd64/conf/{ATH,GENERIC}
>>>> 27,30d26
>>>> < options ATH_DEBUG
>>>> < options AH_DEBUG
>>>> < options ATH_DIAGAPI
>>>> <
>>>> 142c138
>>>> < #device               cd              # CD
>>>> ---
>>>>>
>>>>> device                cd              # CD
>>>>
>>>> [jri:~] root# ifconfig
>>>> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>>> 1500
>>>>         options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
>>>>         ether 6c:f0:49:d5:6f:6a
>>>>         inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255
>>>>         inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>         media: Ethernet autoselect (1000baseT <full-duplex>)
>>>>         status: active
>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>>>>         inet6 ::1 prefixlen 128
>>>>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>>>>         inet 127.0.0.1 netmask 0xff000000
>>>>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>>> [jri:~] root# kldload if_ath
>>>> kldload: can't load if_ath: File exists
>>>
>>>
>>> _______________________________________________
>>> freebsd-wireless@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>> To unsubscribe, send any mail to
>>> "freebsd-wireless-unsubscr...@freebsd.org"
>>
>>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to