Multiple VAPs should be working. Doubly so on the AR5212 series hardware.
adrian On 29 April 2013 03:14, Paul Schenkeveld <free...@psconsult.nl> wrote: > Hi, > > I still cannot get VAP's to work, perhaps I'm doing something wrong, > perhaps VAP support isn't ready yet. > > My hardware: Soekris net4826 with Atheros 5212 mini-pci card > My FreeBSD: FreeBSD 10.0-CURRENT #0 r249745 > My config: > > wlans_ath0="wlan63 wlan207" > create_args_wlan63="wlanmode hostap mode 11g channel 7 country NL" > create_args_wlan207="wlanmode hostap mode 11g channel 7 country NL" > hostapd_config="/etc/hostapd.conf.testB /etc/hostapd.conf.testO" > > ==== hostapd.conf.testB: > driver=bsd > interface=wlan63 > ctrl_interface=/var/run/hostapd.wlan63 > ctrl_interface_group=wheel > ssid=testB > wpa=1 > wpa_passphrase=******** > wpa_key_mgmt=WPA-PSK > wpa_pairwise=CCMP TKIP > > ==== hostapd.conf.testO: > driver=bsd > interface=wlan207 > ctrl_interface=/var/run/hostapd.wlan207 > ctrl_interface_group=wheel > ssid=testO > wpa=1 > wpa_passphrase=******** > wpa_key_mgmt=WPA-PSK > wpa_pairwise=CCMP TKIP > > I have tried running a single hostapd with two config files and running > two separate hostapd daemons each with a config file. In both cases, I > get one wlan working, the other does not work. Running hostapd with -d > does not reveal the problem to me either (I see debug output when > connecting to the working wlan but not when trying to connect to the > other one). Hostapd debug output is below. > > My questions: > > Should VAP work at all? > Does anyone know of VAP problems with the Atheros 5212? > Should I run one hostapd with multiple config files or separate daemons? > Anything else I'm doing wrong? > > Thanks for any help! > > Paul Schenkeveld > > ------------------------------------------------------------------------ > > hostapd -d output: > > ap1# hostapd -P /var/run/hostapd.pid -d /etc/hostapd.conf.testB > /etc/hostapd.conf.testO > Configuration file: /etc/hostapd.conf.testB > ctrl_interface_group=0 (from group name 'wheel') > BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) > Completing interface initialization > Flushing old station entries > Deauthenticate all stations > bsd_set_privacy: enabled=0 > bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=1 seq_len=0 key_len=0 > bsd_del_key: key_idx=0 > bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=1 > bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=2 > bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=3 > Using interface wlan63 with hwaddr 00:0b:6b:dd:50:7b and ssid 'testB' > Deriving WPA PSK based on passphrase > SSID - hexdump_ascii(len=5): > 74 65 73 74 42 testB > PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED] > PSK (from passphrase) - hexdump(len=32): [REMOVED] > bsd_set_ieee8021x: enabled=1 > bsd_configure_wpa: enable WPA= 0x1 > WPA: group state machine entering state GTK_INIT (VLAN-ID 0) > GMK - hexdump(len=32): [REMOVED] > GTK - hexdump(len=32): [REMOVED] > WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) > bsd_set_key: alg=2 addr=0x0 key_idx=1 set_tx=1 seq_len=0 key_len=32 > bsd_set_privacy: enabled=1 > bsd_set_opt_ie: set WPA+RSN ie (len 28) > wlan63: Setup of interface done. > Configuration file: /etc/hostapd.conf.testO > ctrl_interface_group=0 (from group name 'wheel') > BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) > Completing interface initialization > Flushing old station entries > Deauthenticate all stations > bsd_set_privacy: enabled=0 > bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=1 seq_len=0 key_len=0 > bsd_del_key: key_idx=0 > bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=1 > bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=2 > bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > bsd_del_key: key_idx=3 > Using interface wlan207 with hwaddr 00:0b:6b:dd:50:7b and ssid 'testO' > Deriving WPA PSK based on passphrase > SSID - hexdump_ascii(len=5): > 74 65 73 74 4f testO > PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED] > PSK (from passphrase) - hexdump(len=32): [REMOVED] > bsd_set_ieee8021x: enabled=1 > bsd_configure_wpa: enable WPA= 0x1 > WPA: group state machine entering state GTK_INIT (VLAN-ID 0) > GMK - hexdump(len=32): [REMOVED] > GTK - hexdump(len=32): [REMOVED] > WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) > bsd_set_key: alg=2 addr=0x0 key_idx=1 set_tx=1 seq_len=0 key_len=32 > bsd_set_privacy: enabled=1 > bsd_set_opt_ie: set WPA+RSN ie (len 28) > wlan207: Setup of interface done. > Discard routing message to if#0 (not for us 10) > > Discard routing message to if#0 (not for us 11) > > Discard routing message to if#0 (not for us 10) > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
