Hi,
I understand you want to fix it in 9.1. The reason that I was using 8.1 is that I want to see how injection works there, to then somehow clone this to a distribution based on 8.1 which does not support injection. But I can install 9.1 alongside to test an updated driver in the future for sure. The hardware is capable of injection, listed at the aircrack-ng website as a recommendation etc. http://www.aircrack-ng.org/doku.php?id=compatibility_drivers http://softwaregeneration.org/alfa-network-awus036h-wifi/ Is it complicated to add ahdemo support? Mark > Date: Fri, 19 Jul 2013 14:41:25 -0700 > Subject: Re: Alfa AWUS036H WiFi - driver not supporting AHDEMO mode for > injection > From: adr...@freebsd.org > To: mark_m...@hotmail.com > CC: freebsd-wireless@freebsd.org > > Hi, > > * Please update to -HEAD first; I'd like to fix packet injection mode > (which means making ahdemo mode) but I'd like to do this in -HEAD. > * I don't know if the hardware supports raw frame injection. Maybe it > does but the driver hasn't been updated yet. > > > > -adrian > > On 19 July 2013 13:48, Mark Moes <mark_m...@hotmail.com> wrote: > > Hi all! > > > > Having just posted opened a thread about this on the FreeBSD forum, I'll > > more or less copy/paste that post in this mail. Thread: > > http://forums.freebsd.org/showthread.php?p=227470 > > - - - > > > > I have the "Alfa AWUS036h 802.11 b/g Long-Range USB Adapter" connected to > > my laptop which is running a FreeBSD 8.1 installation. The adapter is > > widely used for injecting wireless frames, which is my objective as well. > > > > I have set it up to use the urtw(4) driver (manpage) by loading the module > > at boot time. > > > > The output of `dmesg | grep urtw` is as follows: > > > > urtw0: <vendor 0x0bda product 0x8187, class 0/0, rev 2.00/1.00, addr 2> on > > usbus7 > > urtw0: unknown RTL8187L type: 0x8000000 > > urtw0: rtl8187l rf rtl8225u hwrev none > > > > > > That looks kinda strange, but the adapter works and I am able to > > successfully create a wlan0 interface and connect to my WPA2 secured > > network. > > However, if I want to create a wlan0 interface (after destroying the > > previous one) that is usable for packet injection, this is what I get. > > > > `ifconfig wlan create wlandev urtw0 wlanmode ahdemo` > > > > urtw0: AHDEMO mode not supported # <-- this line is colored white as > > opposed to normal gray > > ifconfig: SIOCIFCREATE2: Operation not supported > > > > > > Is this mode simply not (yet) supported? > > > > > > Cheers, > > > > Mark / asfdg > > > > _______________________________________________ > > freebsd-wireless@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
