Cool, thanks.

Please make sure you post patches for all the things you fix. I'd love
to see this kind of thing work out of the box. :)


-adrian

On 29 July 2013 07:36, Anthony Jenkins <scoobi_...@yahoo.com> wrote:
> Thanks Adrian,
>
> I've managed to fix a few things on this laptop, the remaining stuff is
> BIOS/ACPI related.  acpi_hp(4) isn't working, has something to do with WMI.
> Hoping if I fix the ACPI stuff I can have me AR9565 working.  I'll poke
> around and report back; the RFKill suggestion is a good place to start
> looking.
>
> Thanks,
> Anthony
>
>
> On 07/29/13 10:30, Adrian Chadd wrote:
>>
>> Hm, maybe rfkill is set?
>>
>> The AR9565 is supported. I have the reference NICs from Atheros; they
>> work just fine.
>>
>> It may be some kind of ACPI setting to enable/disable RFKill so the
>> radio side is actually enabled.
>>
>> I'm sorry, I don't have much more than that to offer without having
>> the laptop here.
>>
>> If someone's willing to send me one, I'll get 10 + wireless working on
>> it and then hand it over to ixsystems to join the 'stuff we really
>> should get pcbsd running smoothly on' pile. They're about $500 off of
>> amazon.com.
>>
>> Thanks,
>>
>>
>>
>> -adrian
>>
>> On 29 July 2013 07:21, Anthony Jenkins <scoobi_...@yahoo.com> wrote:
>>>
>>> I just got an HP ENVY Sleekbook 6z-1100 laptop hoping it came with a
>>> FreeBSD-supported wireless NIC.  It has an Atheros AR9565 and looking at
>>> the
>>> logs it _seems_ like it should be working, but I get no network traffic.
>>> I
>>> haven't started the Atheros debugging procedure yet, save to compile in
>>> option AH_DEBUG and move ath(4) out of the kernel & to a module to
>>> facilitate changes.  Works (of course) in Win8 which came with laptop.
>>> Wireless enabled LED is amber (disabled) in FreeBSD, goes from amber to
>>> white (enabled) when I boot the Win8 HDD.
>>>
>>> Here's various logs and misc. system info.  What should I try next?
>>> Thanks
>>> in advance!
>>>
>>> [root@laptop /usr/src]# uname -a n
>>> FreeBSD laptop.qtchat.org 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Sat Jul
>>> 27
>>> 23:45:30 EDT 2013 r...@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL
>>> amd64
>>>
>>> [root@laptop /usr/src]# dmesg
>>> Copyright (c) 1992-2013 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>>      The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 10.0-CURRENT #0: Sat Jul 27 23:45:30 EDT 2013
>>>      r...@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL amd64
>>> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
>>> module_register: module pci/xhci already exists!
>>> Module pci/xhci failed to register: 17
>>> CPU: AMD A10-4655M APU with Radeon(tm) HD Graphics   (1996.31-MHz
>>> K8-class
>>> CPU)
>>>    Origin = "AuthenticAMD"  Id = 0x610f01  Family = 0x15  Model = 0x10
>>> Stepping = 1
>>>
>>> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>>>
>>> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
>>>    AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>>>    AMD
>>>
>>> Features2=0x1abbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,<b23>,<b24>>
>>>    Standard Extended Features=0x8<BMI1>
>>>    TSC: P-state invariant, performance statistics
>>> real memory  = 17179869184 (16384 MB)
>>> avail memory = 15463530496 (14747 MB)
>>> Event timer "LAPIC" quality 400
>>> ACPI APIC Table: <HPQOEM 18DE    >
>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>>> FreeBSD/SMP: 1 package(s) x 4 core(s)
>>>   cpu0 (BSP): APIC ID: 16
>>>   cpu1 (AP): APIC ID: 17
>>>   cpu2 (AP): APIC ID: 18
>>>   cpu3 (AP): APIC ID: 19
>>> ioapic0: Changing APIC ID to 4
>>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>>> kbd1 at kbdmux0
>>> acpi0: <HPQOEM SLIC-MPC> on motherboard
>>> acpi0: Power Button (fixed)
>>> cpu0: <ACPI CPU> on acpi0
>>> cpu1: <ACPI CPU> on acpi0
>>> cpu2: <ACPI CPU> on acpi0
>>> cpu3: <ACPI CPU> on acpi0
>>> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8
>>> on
>>> acpi0
>>> Timecounter "HPET" frequency 14318180 Hz quality 950
>>> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>>> Event timer "RTC" frequency 32768 Hz quality 0
>>> attimer0: <AT timer> port 0x40-0x43 on acpi0
>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>> Event timer "i8254" frequency 1193182 Hz quality 100
>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>>> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 iomem
>>> 0xff000000-0xff000fff on acpi0
>>> acpi_button0: <Power Button> on acpi0
>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>> pci0: <ACPI PCI bus> on pcib0
>>> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
>>> 0xe0000000-0xefffffff,0xf0300000-0xf033ffff irq 17 at device 1.0 on pci0
>>> acpi_video0: <ACPI video extension> on vgapci0
>>> hdac0: <ATI (0x9902) HDA Controller> mem 0xf0344000-0xf0347fff irq 18 at
>>> device 1.1 on pci0
>>> hdac0: hdac_get_capabilities: Invalid corb size (0); assuming 256.
>>> hdac0: hdac_get_capabilities: Invalid rirb size (0); assuming 256.
>>> pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>>> pci1: <ACPI PCI bus> on pcib1
>>> pci1: <unknown> at device 0.0 (no driver attached)
>>> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
>>> 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at
>>> device 0.2 on pci1
>>> re0: Using 1 MSI-X message
>>> re0: turning off MSI enable bit.
>>> re0: ASPM disabled
>>> re0: Chip rev. 0x48800000
>>> re0: MAC rev. 0x00000000
>>> miibus0: <MII bus> on re0
>>> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on
>>> miibus0
>>> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
>>> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
>>> 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>>> re0: Ethernet address: 6c:3b:e5:81:21:f0
>>> pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>>> pci2: <ACPI PCI bus> on pcib2
>>> ath0: <Qualcomm Atheros AR9565> mem 0xf0100000-0xf017ffff irq 17 at
>>> device
>>> 0.0 on pci2
>>> ar9300_set_stub_functions: setting stub functions
>>> ar9300_set_stub_functions: setting stub functions
>>> ar9300_attach: calling ar9300_hw_attach
>>> ar9300_hw_attach: calling ar9300_eeprom_attach
>>> ar9300_flash_map: unimplemented for now
>>> Restoring Cal data from DRAM
>>> Restoring Cal data from EEPROM
>>> Restoring Cal data from Flash
>>> Restoring Cal data from Flash
>>> Restoring Cal data from OTP
>>> ar9300_hw_attach: ar9300_eeprom_attach returned 0
>>> ar9300_fill_capability_info: (MCI) MCI support = 1
>>> ath0: RX status length: 48
>>> ath0: RX buffer size: 4096
>>> ath0: TX descriptor length: 128
>>> ath0: TX status length: 36
>>> ath0: TX buffers per descriptor: 4
>>> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
>>> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
>>> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
>>> ath0: [HT] enabling HT modes
>>> ath0: [HT] enabling short-GI in 20MHz mode
>>> ath0: [HT] 1 stream STBC receive enabled
>>> ath0: [HT] 1 RX streams; 1 TX streams
>>> ath0: AR9565 mac 704.0 RF5110 phy 526.12
>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>>> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf0348000-0xf0349fff irq
>>> 18
>>> at device 16.0 on pci0
>>> usbus0: waiting for BIOS to give up control
>>> xhci0: 32 byte context size.
>>> usbus0 on xhci0
>>> ahci0: <AMD Hudson-2 AHCI SATA controller> port
>>> 0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f mem
>>> 0xf034e000-0xf034e7ff irq 19 at device 17.0 on pci0
>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
>>> ahcich0: <AHCI channel> at channel 0 on ahci0
>>> ohci0: <OHCI (generic) USB controller> mem 0xf034d000-0xf034dfff irq 18
>>> at
>>> device 18.0 on pci0
>>> usbus1 on ohci0
>>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf034c000-0xf034c0ff irq
>>> 17
>>> at device 18.2 on pci0
>>> usbus2: EHCI version 1.0
>>> usbus2 on ehci0
>>> ohci1: <OHCI (generic) USB controller> mem 0xf034b000-0xf034bfff irq 18
>>> at
>>> device 19.0 on pci0
>>> usbus3 on ohci1
>>> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf034a000-0xf034a0ff irq
>>> 17
>>> at device 19.2 on pci0
>>> usbus4: EHCI version 1.0
>>> usbus4 on ehci1
>>> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>>> hdac1: <Generic (0x780d1022) HDA Controller> mem 0xf0340000-0xf0343fff
>>> irq
>>> 16 at device 20.2 on pci0
>>> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>>> isa0: <ISA bus> on isab0
>>> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>>> pci3: <ACPI PCI bus> on pcib3
>>> acpi_lid0: <Control Method Lid Switch> on acpi0
>>> acpi_tz0: <Thermal Zone> on acpi0
>>> acpi_tz0: _CRT value is absurd, ignored (226.8C)
>>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>> kbd0 at atkbd0
>>> atkbd0: [GIANT-LOCKED]
>>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>>> psm0: [GIANT-LOCKED]
>>> psm0: model Synaptics Touchpad, device ID 0
>>> battery0: <ACPI Control Method Battery> on acpi0
>>> acpi_acad0: <AC Adapter> on acpi0
>>> sc0: <System console> at flags 0x100 on isa0
>>> sc0: VGA <16 virtual consoles, flags=0x300>
>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>>> ctl: CAM Target Layer loaded
>>> acpi_throttle0: <ACPI CPU Throttling> on cpu0
>>> acpi_throttle1: <ACPI CPU Throttling> on cpu1
>>> acpi_throttle1: failed to attach P_CNT
>>> device_attach: acpi_throttle1 attach returned 6
>>> acpi_throttle2: <ACPI CPU Throttling> on cpu2
>>> acpi_throttle2: failed to attach P_CNT
>>> device_attach: acpi_throttle2 attach returned 6
>>> acpi_throttle3: <ACPI CPU Throttling> on cpu3
>>> acpi_throttle3: failed to attach P_CNT
>>> device_attach: acpi_throttle3 attach returned 6
>>> ZFS filesystem version: 5
>>> ZFS storage pool version: features support (5000)
>>> Timecounters tick every 1.000 msec
>>> hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
>>> hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
>>> pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
>>> hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
>>> hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
>>> pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12 on hdaa1
>>> pcm2: <IDT 92HD91BXX (Analog Mic)> at nid 17 on hdaa1
>>> usbus0: 5.0Gbps Super Speed USB v3.0
>>> usbus1: 12Mbps Full Speed USB v1.0
>>> usbus2: 480Mbps High Speed USB v2.0
>>> usbus3: 12Mbps Full Speed USB v1.0
>>> usbus4: 480Mbps High Speed USB v2.0
>>> ugen3.1: <AMD> at usbus3
>>> uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>> ugen2.1: <AMD> at usbus2
>>> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>> ugen1.1: <AMD> at usbus1
>>> uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>> ugen0.1: <0x1022> at usbus0
>>> uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>>> ugen4.1: <AMD> at usbus4
>>> uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>>> ada0: <Samsung SSD 840 Series DXT06B0Q> ATA-9 SATA 3.x device
>>> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
>>> ada0: Command Queueing enabled
>>> ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
>>> ada0: Previously was known as ad4
>>> SMP: AP CPU #3 Launched!
>>> SMP: AP CPU #1 Launched!
>>> SMP: AP CPU #2 Launched!
>>> Timecounter "TSC" frequency 1996309068 Hz quality 1000
>>> Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
>>> uhub0: 5 ports with 5 removable, self powered
>>> uhub2: 5 ports with 5 removable, self powered
>>> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
>>> [SystemCMOS]
>>> (20130626/evregion-178)
>>> ACPI Error: Region SystemCMOS (ID=5) has no handler
>>> (20130626/exfldio-320)
>>> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
>>> 0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
>>> ACPI Error: Method parse/execution failed [\134_SB_.PCI0.LPC0.EC0_._Q42]
>>> (Node 0xfffffe0026ae8340), AE_NOT_EXIST (20130626/psparse-553)
>>> acpi_ec0: evaluation of query method _Q42 failed: AE_NOT_EXIST
>>> uhub3: 4 ports with 4 removable, self powered
>>> Root mount waiting for: usbus4 usbus2
>>> uhub1: 5 ports with 5 removable, self powered
>>> uhub4: 5 ports with 5 removable, self powered
>>> Root mount waiting for: usbus4 usbus2
>>> ugen2.2: <Ralink> at usbus2
>>> ugen4.2: <SuYin> at usbus4
>>> Trying to mount root from zfs:sys []...
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> ugen3.2: <vendor 0x0cf3> at usbus3
>>> ar9300_Stub_GetCTSTimeout: called
>>> ar9300_Stub_GetCTSTimeout: called
>>> ar9300_Stub_GetAntennaSwitch: called
>>> ar9300_Stub_GetAntennaSwitch: called
>>> wlan1: Ethernet address: 20:68:9d:c5:76:8d
>>> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
>>> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
>>> 1c:bd:b9:8c:9d:71
>>> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
>>> on
>>> usbus3
>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>> run0: firmware RT3071 ver. 0.236 loaded
>>> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
>>> WARNING: attempt to domain_add(netgraph) after domainfinalize()
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> WARNING pid 2654 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>> WARNING pid 2655 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>> WARNING pid 2656 (python2.7): ioctl sign-extension ioctl ffffffff80087467
>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>> run0: firmware RT3071 ver. 0.236 loaded
>>> wlan0: link state changed to UP
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> uhub3: at usbus0, port 1, addr 1 (disconnected)
>>> uhub2: at usbus1, port 1, addr 1 (disconnected)
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> uhub1: at usbus2, port 1, addr 1 (disconnected)
>>> ugen2.2: <Ralink> at usbus2 (disconnected)
>>> run0: at uhub1, port 1, addr 2 (disconnected)
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> wlan0: link state changed to DOWN
>>> uhub0: at usbus3, port 1, addr 1 (disconnected)
>>> ugen3.2: <vendor 0x0cf3> at usbus3 (disconnected)
>>> ubt0: at uhub0, port 4, addr 2 (disconnected)
>>> xhci_interrupt: host controller halted
>>> xhci_interrupt: host controller halted
>>> uhub4: at usbus4, port 1, addr 1 (disconnected)
>>> ugen4.2: <SuYin> at usbus4 (disconnected)
>>> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
>>> [SystemCMOS]
>>> (20130626/evregion-178)
>>> ACPI Error: Region SystemCMOS (ID=5) has no handler
>>> (20130626/exfldio-320)
>>> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
>>> 0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
>>> ACPI Error: Method parse/execution failed [\134_PTS] (Node
>>> 0xfffffe0026ab4c80), AE_NOT_EXIST (20130626/psparse-553)
>>> acpi0: AcpiEnterSleepStatePrep failed - AE_NOT_EXIST
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>> xhci0: 32 byte context size.
>>> uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>>> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>> uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>>> uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>> uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>> uhub0: 4 ports with 4 removable, self powered
>>> uhub4: 5 ports with 5 removable, self powered
>>> uhub3: 5 ports with 5 removable, self powered
>>> uhub1: 5 ports with 5 removable, self powered
>>> uhub2: 5 ports with 5 removable, self powered
>>> ugen2.2: <Ralink> at usbus2
>>> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
>>> ugen4.2: <SuYin> at usbus4
>>> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
>>> 1c:bd:b9:8c:9d:71
>>> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
>>> run0: firmware RT3071 ver. 0.236 loaded
>>> ugen3.2: <vendor 0x0cf3> at usbus3
>>> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
>>> on
>>> usbus3
>>> wlan0: link state changed to UP
>>> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>>>
>>> [root@laptop /usr/src]# cat /etc/rc.conf
>>> wlans_run0="wlan0"
>>> wlans_ath0="wlan1"
>>> ifconfig_wlan0="DHCP WPA"
>>> ...
>>>
>>> [root@laptop /usr/src]# ifconfig -a
>>> ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
>>>      ether 20:68:9d:c5:76:8d
>>>      nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>      status: no carrier
>>> wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>      ether 20:68:9d:c5:76:8d
>>>      nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>      status: no carrier
>>>      ssid "" channel 1 (2412 MHz 11b)
>>>      regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss
>>> 7
>>>      scanvalid 60 wme burst bintval 0
>>> ...
>>>
>>> [root@laptop /usr/src]# /etc/rc.d/netif start ath0
>>> Starting Network: ath0.
>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>> 2290
>>>      ether 20:68:9d:c5:76:8d
>>>      nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>      media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
>>>      status: associated
>>> Additional inet routing options: ignore ICMP redirect=YES log ICMP
>>> redirect=YES.
>>>
>>> [root@laptop /usr/src]# for iface in ath0 wlan1; do ifconfig ${iface};
>>> done
>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>> 2290
>>>      ether 20:68:9d:c5:76:8d
>>>      nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>      media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
>>>      status: associated
>>> wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>> 1500
>>>      ether 20:68:9d:c5:76:8d
>>>      inet 67.215.65.145 netmask 0xff000000 broadcast 67.215.65.145
>>>      nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>      status: no carrier
>>>      ssid "" channel 2 (2417 MHz 11g)
>>>      regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss
>>> 7
>>>      scanvalid 60 protmode CTS wme burst
>>>
>>> [root@laptop /usr/src]# dmesg
>>> ...
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>>>
>>>
>>> --
>>> Anthony Jenkins
>>> _______________________________________________
>>> freebsd-wireless@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>> To unsubscribe, send any mail to
>>> "freebsd-wireless-unsubscr...@freebsd.org"
>
>
>
> --
> Anthony Jenkins
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to