On Thu, Nov 7, 2013 at 3:12 PM, Adrian Chadd <adr...@freebsd.org> wrote:
> On 7 November 2013 12:09, Eitan Adler <li...@eitanadler.com> wrote:
>> [ top posting? ]
>>
>> On Thu, Nov 7, 2013 at 2:54 PM, Adrian Chadd <adr...@freebsd.org> wrote:
>>> Hi!
>>>
>>> Look at if_iwn_debug.h. turn on STATE, CMD, INTR and RECV. Then, try again.
>>
>> I define IWN_DEBUG.  Not sure what you mean by enabling STATE, CMD, etc.
>>
>>
>
> Check if_iwn_debug.h for the bit mask value, and then sysctl
> dev.iwn.0.debug=<debugmask>

I set it to 0xFF
FW: "2000 fw v18.168.6.1 build 0
", build 0x0
using alternative 0
TLV type 16 reconized but not handled
TLV type 17 reconized but not handled
TLV type 6 reconized but not handled
PAN Support found: 1
TLV type 8 reconized but not handled
TLV type 9 reconized but not handled
TLV type 10 reconized but not handled
TLV type 11 reconized but not handled
TLV type 12 reconized but not handled
TLV type 13 reconized but not handled
iwn_notif_intr: qid 0 idx 0 flags 0 type 1(UC_READY) len 36
microcode alive notification version=18.168 subtype=9 alive=1
iwn5000_ict_reset: enabling ICT
iwn5000_send_wimax_coex: Configuring WiMAX coexistence
iwn_notif_intr: qid 4 idx 0 flags 0 type 90(IWN5000_CMD_WIMAX_COEX) len 4
iwn_notif_intr: qid 0 idx 1 flags 0 type 98(UNKNOWN INTR NOTIF/CMD) len 8
iwn_notif_intr: qid 4 idx 1 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 2 flags 0 type 101(IWN5000_CMD_CALIB_CONFIG) len 8
iwn_notif_intr: qid 0 idx 2 flags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 12
iwn_notif_intr: qid 0 idx 3 flags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 520
iwn_notif_intr: qid 0 idx 4 flags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 1352
iwn_notif_intr: qid 0 idx 5 flags 0 type 102(IWN5000_CMD_CALIB_RESULT) len 92
iwn_notif_intr: qid 0 idx 6 flags 0 type 103(IWN5000_CMD_CALIB_COMPLETE) len 8
iwn_notif_intr: qid 0 idx 0 flags 0 type 1(UC_READY) len 36
microcode alive notification version=18.168 subtype=1 alive=1
iwn5000_ict_reset: enabling ICT
iwn5000_send_wimax_coex: Configuring WiMAX coexistence
iwn_notif_intr: qid 4 idx 0 flags 0 type 90(IWN5000_CMD_WIMAX_COEX) len 4
iwn_notif_intr: qid 0 idx 1 flags 0 type 98(UNKNOWN INTR NOTIF/CMD) len 8
iwn_notif_intr: qid 4 idx 1 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 2 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 3 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 4 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 5 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_notif_intr: qid 4 idx 6 flags 0 type 176(IWN_CMD_PHY_CALIB) len 4
iwn_newstate: INIT -> SCAN
iwn_scan: chan 1 flags 0x3 rf_gain 0x28 dsp_gain 0x6e active 0x24 passive 0x78
sending scan command nchan=1
iwn_notif_intr: qid 4 idx 7 flags 0 ty
firmware error log:
  error type      = "UNKNOWN" (0x00002776)
  program counter = 0x00009348
  source line     = 0x00000067
  error data      = 0x0408008000000002
  branch link     = 0x0000933600009336
  interrupt link  = 0x0000E1AE00000000
  time            = 29988
driver status:
  tx ring  0: qid=0  cur=0   queued=0
  tx ring  1: qid=1  cur=0   queued=0
  tx ring  2: qid=2  cur=0   queued=0
  tx ring  3: qid=3  cur=0   queued=0
  tx ring  4: qid=4  cur=9   queued=0
  tx ring  5: qid=5  cur=0   queued=0
  tx ring  6: qid=6  cur=0   queued=0
  tx ring  7: qid=7  cur=0   queued=0
  tx ring  8: qid=8  cur=0   queued=0
  tx ring  9: qid=9  cur=0   queued=0
  tx ring 10: qid=10 cur=0   queued=0
  tx ring 11: qid=11 cur=0   queued=0
  tx ring 12: qid=12 cur=0   queued=0
  tx ring 13: qid=13 cur=0   queued=0
  tx ring 14: qid=14 cur=0   queued=0
  tx ring 15: qid=15 cur=0   queued=0
  tx ring 16: qid=16 cur=0   queued=0
  tx ring 17: qid=17 cur=0   queued=0
  tx ring 18: qid=18 cur=0   queued=0
  tx ring 19: qid=19 cur=0   queued=0
  rx ring: cur=10


-- 
Eitan Adler
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to