Yes, the interference can be calculated by averaging the beacon RSSI (dB) of the overlapping channels, e.g. for channel 6, the beacon RSSI of channels 4, 5, 6, 7, 8 are averaged. Normally channels 1, 6, and 11 are chosen, although other channels may have less interference, in order to be a 'good neighbor'.
On Wed, Dec 4, 2013 at 11:03 AM, Jim Thompson <j...@netgate.com> wrote: > > On Dec 3, 2013, at 7:56 PM, Adrian Chadd <adr...@freebsd.org> wrote: > > > Now, ideally it'd actually check the channel for interference and > > channel busy status, and use _that_ metric. > > Ideally, it would attempt to get co-channel with other APs on the same > channel. > > Especially in 2.4GHz (or any of the 5GHz bands). > > Because you would *much* rather share the air (via collision avoidance) > than raise the noise floor for someone (everyone) else. > > And, given that everyone has a DC receiver these days, there are NO > “non-overlapping channels”. > > jim > > _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"