Hi all.
ifconfig wlan0 create results in:
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether f8:1a:67:73:bf:84
inet6 fe80::fa1a:67ff:fe73:bf84%wlan0 prefixlen 64 scopeid 0x5
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
status: running
ssid test channel 4 (2427 MHz 11g ht/40+) bssid f8:1a:67:73:bf:84
regdomain NONE country UA indoor ecm authmode OPEN privacy OFF
txpower 30 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8
shortgi wme burst dtimperiod 1 -dfs
While after starting hostapd I'll have:
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether f8:1a:67:73:bf:84
inet6 fe80::fa1a:67ff:fe73:bf84%wlan0 prefixlen 64 scopeid 0x5
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
ssid test channel 4 (2427 MHz 11g) bssid f8:1a:67:73:bf:84
regdomain NONE country UA indoor ecm authmode OPEN privacy OFF
txpower 30 scanvalid 60 protmode CTS wme burst dtimperiod 1 -dfs
The key difference is "mode 11ng" vs "mode 11g" and "2427 MHz 11g
ht/40+" vs "2427 MHz 11g". man for `hostapd.conf` misses docs about
hw_mode and examples looks like they are from a different world: there's
no `ieee80211h` option and `ieee80211n` is actually not supported (yet
present in /usr/share/examples/hostapd/hostapd.conf).
--
Sphinx of black quartz, judge my vow.
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
