dhclient: send_packet: No buffer space available - is one of them,
the other has occurred during portmaster installs.
I have two FreeBSD laptops side-by-side with the same settings to the
same router and the Intel (iwn0, with FreeBSD 10.0-RELEASE) isn't giving
me any errors.
On 04/08/14 14:38, Adrian Chadd wrote:
> Ah. Can you post the buffer errors you're seeing?
> On 8 April 2014 11:37, tzoi516 <tzoi...@gmail.com> wrote:
>> On 04/08/14 14:23, Adrian Chadd wrote:
>>> It should work fine on -10 and HEAD. Is it not working fine?
>>> On 8 April 2014 09:12, tzoi516 <tzoi...@gmail.com> wrote:
>>>> I have a Toshiba Satellite S55-A5169
>>>> This specific one:
>>>> It has the Atheros combo Wi-Fi/NIC, and the Wi-Fi uses the AR9565. For
>>>> it to work I have to change the SATA Controller Mode in the BIOS from
>>>> "AHCI" to "Compatibility". I don't know if this information helps, and
>>>> it's the only AHCI setting I can tweak.
>>>> email@example.com mailing list
>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
>> With SATA controller mode set to Compatibility then it works, but a
>> little wonky at startup - sometimes I'll have to run wpa_supplicant -i
>> wlan0 -c /etc/wpa_supplicant.conf. Infrequently a buffer error appears.
>> With SATA controller mode set to AHCI then I can ifconfig wlan0 list
>> scan and see available networks but I can't connect to any except for
>> unprotected networks.
>> I'm currently running FreeBSD 10.0-STABLE
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"