I've mailing the list before about and issue with 5Ghtz which I then found was actually the fact that 11n is not supported on USB cards!
Still I have a 100/10 fibre connection, and I've been testing some FreeBSD 11-current stuff on the laptop with this card (the on-board card is not supported by freebsd) I'm very close to the router and can't get a better connection than 7-8M download and on local speeds its not better than that (tested with iperf). The on-board card is a Broadcom 4333 and I got better performance with this one (using ndis) but it crashes a lot so its not really a better option. To be clear the card is connected to the 2.4Ghtz network which accepts N/G/B, I have the 5Ghtz set to N only as this is currently the only device at home using 2.4Ghtz. I don't expect getting the full 54M limit but this is really poor! What info can I post to better investigate? Melhores Cumprimentos // Best Regards ----------------------------------------------- *Miguel Clara* _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
